Genie TMZ-34, TMZ-19 manual After Each Use

Page 31

Fourth Edition • First Printing

Operator's Manual

 

 

 

 

 

 

OPERATING INSTRUCTIONS

After Each Use

1Select a safe parking location—firm level surface, clear of obstruction and traffic.

2Rotate the turntable so that the platform is opposite the tongue of the machine.

3Use the black arrows to properly align the turntable.

4Lower the boom to the stowed position.

5Secure the boom with the hold-down latches.

6Turn the key switch to the off position and remove the key to secure from unauthorized use.

7Chock the wheels.

8Charge the batteries.

Part No. 97866

GenieTMZ-34/19

29

Image 31 Contents
Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsBodily Injury Hazard Explosion and Fire Hazards Collision HazardsComponent Damage Hazards Lifting HazardsDecal Legend Towing HazardsCollision Hazard Personnel Lifting Configuration Tip-over HazardsMaterial Lifting Configuration Collision Hazards Fall HazardsLifting Hazard Battery Safety Burn HazardsExplosion Hazards Tip-over HazardPlatform Control Panel ControlsStop Ground Control Panel manual outriggers Ground Control Panel hydraulic outriggers Stop Stop Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Hydraulic Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Tires and Wheels MaintenanceCheck the Batteries Scheduled MaintenanceFunction Tests Set upTest Emergency Stop At the Ground ControlsTest Outrigger Interlock Test the Horn At the Platform ControlsTest the Boom Functions Test the Tilt SensorGround Control Panels Test Boom Functions and Function Enable Workplace Inspection Workplace Inspection Only use the machine as it was intended Operating InstructionsTo Position Platform Emergency StopOperation from Ground Operation from PlatformTransport Manual LoweringManual Turntable Rotation Fall ProtectionMoving Machine Without a Tow Vehicle Towing InformationBacking Up with Trailer If equipped with surge brake After Each Use Material Lifting Configuration Set up Material Lifting Configuration Observe and ObeyVoltage Conversion Battery and Charger Instructions Observe and ObeyDry Battery Filling Charging Instructions To Charge BatteryDecal Inspection DecalsSide PowerGround ControlsAnsi & CSA SpecificationsReporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA