![](/images/new-backgrounds/1123365/12336515x1.webp)
Operator's Manual | Fourth Edition • First Printing | |
|
|
|
|
|
|
SAFETY RULES
Personnel Lifting Configuration
Tip-over Hazards
Do not use the platform as a crane.
Do not place loads outside the platform perimeter.
Do not place or attach overhanging loads to any part of the platform.
Do not push off or pull toward any object outside of the platform.
Maximum allowable side force -
90 lbs / 400 N
Do not use the platform controls to free a platform that is caught, snagged or otherwise prevented from normal motion by an adjacent structure. All personnel must be removed from the platform before attempting to free the platform using the ground controls.
Fall Hazards
Occupants must wear a safety belt or harness and comply with applicable governmental regulations. Attach the lanyard to the anchor provided in the platform.
Lower the platform entry
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Collision Hazard
Be aware of crushing hazards when grasping the platform guard rail.
Material Lifting Configuration
Collision Hazards
Do not raise the load unless the material lifting hook is properly secured to the machine.
Do not raise unless the load is properly balanced and secured to the machine.
Do not stand under or allow personnel under the load or the machine when the load is raised.
Crushing Hazard
Use common sense and planning when operating the machine with the platform controls from the ground. Maintain safe distances between the operator, the machine and fixed objects.
6 | Part No. 97866 |