Genie TMZ-34, TMZ-19 manual Material Lifting Configuration Observe and Obey

Page 32

Operator's Manual

Fourth Edition • First Printing

 

 

 

 

 

 

OPERATING INSTRUCTIONS

Material Lifting Configuration

Observe and Obey:

Maintain safe distances between the operator, the machine and fixed objects.

Be aware of the direction the boom will travel when using the platform controls.

Material Lifting Configuration Set up

1Turn the key switch to the off position.

2Remove the pin that secures the material lifting hook to the base. Remove the material lifting hook and replace the pin.

3Disconnect the running lights and the platform controls from the platform.

4Remove the platform controls. Open the clamp on the back of the platform controls and slide the controls up and off.

5Open the controls side turntable cover.

6Disconnect the electrical cord on the bottom right side of the ground control box. Connect the platform control cord disconnected in step 3 to the ground control box. Close the turntable cover.

7Support the platform. Remove the toggle pin that secures the platform to the jib boom.

8Lift the platform up and remove it from the machine.

9To install the material lifting hook, insert the bottom rail into the platform mounting bracket and rotate up into position. Insert the toggle pin.

10Operate the material lifting hook from the ground with the platform controls. The key switch should be turned to the platform control position.

11Reverse the above process to install the platform and return the machine to a personnel lifting configuration.

30

GenieTMZ-34/19

Part No. 97866

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsBodily Injury Hazard Collision Hazards Component Damage HazardsLifting Hazards Explosion and Fire HazardsTowing Hazards Decal LegendPersonnel Lifting Configuration Tip-over Hazards Material Lifting Configuration Collision HazardsFall Hazards Collision HazardBattery Safety Burn Hazards Explosion HazardsTip-over Hazard Lifting HazardControls Platform Control PanelStop Ground Control Panel manual outriggers Ground Control Panel hydraulic outriggers Stop Stop Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelMaintenance Check the Tires and WheelsScheduled Maintenance Check the BatteriesSet up Function TestsTest Outrigger Interlock At the Ground ControlsTest Emergency Stop At the Platform Controls Test the Boom FunctionsTest the Tilt Sensor Test the HornGround Control Panels Test Boom Functions and Function Enable Workplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedEmergency Stop Operation from GroundOperation from Platform To Position PlatformManual Lowering Manual Turntable RotationFall Protection TransportBacking Up with Trailer If equipped with surge brake Towing InformationMoving Machine Without a Tow Vehicle After Each Use Material Lifting Configuration Observe and Obey Material Lifting Configuration Set upBattery and Charger Instructions Observe and Obey Dry Battery Filling Charging InstructionsTo Charge Battery Voltage ConversionDecals Decal InspectionPower GroundControls SideSpecifications Ansi & CSAGenie Industries PO Box Redmond, WA Reporting Safety DefectsReporting Safety Defects

TMZ-34, TMZ-19 specifications

The Genie TMZ-34 and TMZ-19 are innovative models in the field of aerial work platforms designed for efficiency, mobility, and safety. These units reflect Genie’s commitment to providing high-quality, reliable equipment for various applications in construction, maintenance, and industrial settings.

The Genie TMZ-34 features a working height of 12.5 meters (41 feet) and a maximum outreach of 8.9 meters (29 feet). It is equipped with a proportional lift and drive system, allowing for smooth and precise operation. The platform's capacity stands at 227 kg (500 lbs), making it suitable for multiple operators or considerable materials. The TMZ-34 offers 360-degree rotation on its turntable, enhancing its versatility and maneuverability at elevated heights. Its compact design enables it to work effectively in tight spaces, making it a valuable asset for indoor applications or cramped construction sites.

On the other hand, the Genie TMZ-19 is designed for lighter tasks, with a working height of 7.8 meters (25.6 feet) and a maximum outreach of 3.7 meters (12 feet). With a platform capacity of 227 kg (500 lbs), it also accommodates multiple workers or tools. The Genie TMZ-19 boasts a lower weight, making it more portable and easier to transport between job sites.

Both models come with Genie’s advanced safety features, including automatic leveling systems, emergency descent mechanisms, and non-slip surfaces on the platforms. Additionally, they are designed with robust, durable materials that withstand heavy use.

Another significant technology incorporated in both models is the AC electric drive system, which reduces noise and emissions, aligning with environmental standards and making them suitable for indoor operations. The user-friendly controls and intuitive design also enhance operator comfort, allowing for extended periods of use without fatigue.

Overall, the Genie TMZ-34 and TMZ-19 are perfect choices for professionals seeking reliable, efficient, and safe aerial work platforms. Their advanced features, safety systems, and compact designs make them indispensable tools for a variety of tasks, from maintenance to construction, ensuring user satisfaction and improved productivity on the job.
Top Page Image Contents