Towing Information

Operator's Manual	Fourth Edition • First Printing

OPERATING INSTRUCTIONS

Use the checklist provided on the back cover of this manual before towing and while on the road.

Driving a vehicle/trailer combination is different from driving a vehicle alone.

Anticipate stops. Brake early.

Increase the distance between your vehicle and the vehicle in front of you to twice the normal following distance when towing a trailer. Allow more following distance in adverse weather.

Slow down for downgrades and shift your transmission into a lower gear.

Slow down for curves, adverse weather, hazardous road conditions and expressway exits.

Your vehicle/trailer combination may experience momentary disturbances. If a disturbance happens, do not brake, speed up or turn the steering wheel. Let off the gas pedal and keep the steering wheel in a straight ahead position, sufficient to maintain the lane of travel.

If the combination travels off the paved roadway, hold the steering wheel firmly. Let off the gas pedal. Do not apply your brakes. Do not turn sharply. Slow down below 25 mph / 40 km/h. Then gradually turn the steering wheel to get back on the roadway. Proceed with caution when entering traffic.

Set all tires to the proper pressure. Find the recommended cold pressures on the tire sidewall, owner’s manual or on the trailer decal. Do not put more pressure in the tire than is on the tire sidewall. Tire pressures go up during driving. Do not let off this extra pressure.

When passing other vehicles, be sure to leave enough room for the extra length of the trailer. You will need to go much farther beyond the passed vehicle before you can return to your lane.

When turning with a trailer, avoid jerky or sudden movements.

Inspect all connections at each stop. Use the checklist provided on the back cover of this manual.

Moving Machine Without a Tow Vehicle

Do not attempt to manually move a machine unless it is on a firm, level surface. Use the parking brake to control the speed of the machine while moving it.

Backing Up with Trailer

(if equipped with surge brake)

Surge brake systems are optional equipment on the Genie TMZ. If your machine is equipped with a surge brake, the system must be released before backing up.

Consult the surge brake system manual for specific instructions on each surge brake.

Be sure that the machine is returned to towing or operating configuration when finished.

GenieTMZ-34/19

Part No. 97866

TMZ-34, TMZ-19 specifications

The Genie TMZ-34 and TMZ-19 are innovative models in the field of aerial work platforms designed for efficiency, mobility, and safety. These units reflect Genie’s commitment to providing high-quality, reliable equipment for various applications in construction, maintenance, and industrial settings.

The Genie TMZ-34 features a working height of 12.5 meters (41 feet) and a maximum outreach of 8.9 meters (29 feet). It is equipped with a proportional lift and drive system, allowing for smooth and precise operation. The platform's capacity stands at 227 kg (500 lbs), making it suitable for multiple operators or considerable materials. The TMZ-34 offers 360-degree rotation on its turntable, enhancing its versatility and maneuverability at elevated heights. Its compact design enables it to work effectively in tight spaces, making it a valuable asset for indoor applications or cramped construction sites.

On the other hand, the Genie TMZ-19 is designed for lighter tasks, with a working height of 7.8 meters (25.6 feet) and a maximum outreach of 3.7 meters (12 feet). With a platform capacity of 227 kg (500 lbs), it also accommodates multiple workers or tools. The Genie TMZ-19 boasts a lower weight, making it more portable and easier to transport between job sites.

Both models come with Genie’s advanced safety features, including automatic leveling systems, emergency descent mechanisms, and non-slip surfaces on the platforms. Additionally, they are designed with robust, durable materials that withstand heavy use.

Another significant technology incorporated in both models is the AC electric drive system, which reduces noise and emissions, aligning with environmental standards and making them suitable for indoor operations. The user-friendly controls and intuitive design also enhance operator comfort, allowing for extended periods of use without fatigue.

Overall, the Genie TMZ-34 and TMZ-19 are perfect choices for professionals seeking reliable, efficient, and safe aerial work platforms. Their advanced features, safety systems, and compact designs make them indispensable tools for a variety of tasks, from maintenance to construction, ensuring user satisfaction and improved productivity on the job.