Genie GS-2668 RT, GS-3268 RT manual Contents, Contact us

Page 2

Operator's Manual

Second Edition · Third Printing

 

 

 

 

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, please call Genie Industries.

Contents

 

 

Page

Safety

1

Legend

7

Controls

8

Pre-operation Inspection

11

Maintenance

13

Function Tests

16

Work Place Inspection

19

Operating Instructions

20

Transport Instructions

23

Decals

24

Specifications

26

Contact us:

 

Internet: http://www.genielift.com

 

e-mail: techpub@genieind.com

 

Copyright © 1998 by Genie Industries

First Edition: Ninth Printing, October 2000

Second Edition: Third Printing, January 2003

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "GS" is a trademark of Genie Industries.

These machines comply with

ANSI/SIA 92.6-1999.

Printed on recycled paper

Printed in U.S.A.

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233

Image 2
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessMaximum capacity GS-2668RT Electrocution HazardsTip-over Hazards Maximum capacity GS-3268RTSafety Rules GS-2668 RT GS-3268 RTFall Hazards Collision Hazards Damaged Machine Hazards Component Damage HazardsExplosion and Fire Hazards Decal Legend Crushing HazardsBodily Injury Hazard Page Controls Ground Control Panel Controls Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceMaintenance Symbols Legend Check the Engine Oil LevelHydraulic oil specifications Check the Hydraulic Oil Level Check the BatteriesScheduled Maintenance Check the Engine Coolant LevelTest Emergency Stop Function TestsAt the Ground Controls Test the Up/Down FunctionsTest the Manual Lowering Test the Up/Down Functions and the Function Enable SwitchesAt the Platform Controls Test the HornTest the Tilt Sensor Operation Test Drive and BrakingTest Limited Drive Speed Workplace Inspection Workplace InspectionStarting the Engine Operating InstructionsEmergency Stop Only use the machine as it was intendedOperation From Ground Operation From PlatformAfter Each Use Operation From Ground with ControllerEngine Stop Button To control individual outriggers Auto Level Outriggers if equippedFall Protection Positioning machine on a slopeBrake Release Operation Transport InstructionsSecuring to Truck or Trailer for Transit Part No. Description Quantity DecalsDecal Inspection Additional decals Model GS-2668 RT SpecificationsPlatform dimensions Drive speedsSpecifications Model GS-3268 RT+34