Genie GS-3268 RT, GS-2668 RT manual Fall Hazards Collision Hazards

Page 7

Second Edition · Third Printing

Operator's Manual

 

 

 

 

SAFETY RULES

Fall Hazards

Collision Hazards

The guardrail system provides fall protection. If occupant(s) of the platform are required to wear personal fall protection equipment (PFPE) due to job site or employer rules, PFPE equipment and its use shall be in accordance with the PFPE manufacturer’s instructions and applicable governmental requirements.

Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.

Do not climb down from the platform when raised.

Keep the platform floor clear of debris.

Close the entry gate before operating.

Do not operate the machine unless the guard rails are properly installed and the entry is secured for operation.

Be aware of limited sight distance and blind spots when driving or operating.

Be aware of extended platform position when moving the machine.

Machine must be on level surface or secured before releasing the brakes.

Operators must comply with employer, job site and governmental rules regarding use of personal protective equipment.

Check work area for overhead obstructions or other possible hazards.

Be aware of crushing hazard when grasping the platform guard rail.

Observe and use color-coded direction arrows on the platform controls and platform decal plate for drive and steer functions.

Part No. 82233

Genie GS-2668 RT & Genie GS-3268 RT

5

Image 7
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesMaximum capacity GS-3268RT Electrocution HazardsTip-over Hazards Maximum capacity GS-2668RTSafety Rules GS-3268 RT GS-2668 RTFall Hazards Collision Hazards Explosion and Fire Hazards Component Damage HazardsDamaged Machine Hazards Bodily Injury Hazard Crushing HazardsDecal Legend Page Controls Ground Control Panel Controls Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Engine Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Hydraulic Oil Level Check the Batteries Hydraulic oil specificationsCheck the Engine Coolant Level Scheduled MaintenanceTest the Up/Down Functions Function TestsAt the Ground Controls Test Emergency StopTest the Horn Test the Up/Down Functions and the Function Enable SwitchesAt the Platform Controls Test the Manual LoweringTest Limited Drive Speed Test Drive and BrakingTest the Tilt Sensor Operation Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsEmergency Stop Starting the EngineOperation From Platform Operation From GroundEngine Stop Button Operation From Ground with ControllerAfter Each Use Positioning machine on a slope Auto Level Outriggers if equippedFall Protection To control individual outriggersSecuring to Truck or Trailer for Transit Transport InstructionsBrake Release Operation Decal Inspection DecalsPart No. Description Quantity Additional decals Drive speeds SpecificationsPlatform dimensions Model GS-2668 RTModel GS-3268 RT Specifications+34