Genie GS-2668 RT manual GS-3268 RT

Page 6

Operator's Manual

Second Edition · Third Printing

 

 

 

 

SAFETY RULES

Do not push off or pull toward any object outside of the platform.

GS-2668 RT

 

ANSI & CSA - 4 person

200 lbs / 890 N

CE - Indoor use only - 4 person

90 lbs / 400 N

CE - Outdoor use - 4 person

90 lbs / 400 N

Australia - Indoor use only - 4 person

90 lbs / 400 N

Australia - Outdoor use - 4 person

90 lbs / 400 N

 

 

GS-3268 RT

 

ANSI & CSA - 4 person

200 lbs / 890 N

CE - Indoor use only - 4 person

90 lbs / 400 N

CE - Outdoor use - 2 person

90 lbs / 400 N

Australia - Indoor use only - 4 person

90 lbs / 400 N

Australia - Outdoor use - 2 person

90 lbs / 400 N

 

 

Do not alter or disable machine components that in any way affect safety and stability.

Do not replace items critical to machine stability with items of different weight or specification.

Do not modify or alter an aerial work platform without prior written permission from the manufacturer. Mounting attachments for holding tools or other materials onto the platform, toeboards or guard rail system can increase the weight in the platform and the surface area of the platform or the load.

Do not place or attach fixed or overhanging loads to any part of this machine.

Do not transport tools and materials unless they are evenly distributed and can be safely handled by person(s) in the platform.

Do not place ladders or scaffolds in the platform or against any part of this machine.

Do not use the machine on a moving or mobile surface or vehicle.

Be sure all tires are in good condition, castle nuts are properly tightened and cotter pins are properly installed.

Do not use the machine as a crane.

Do not push the machine or other objects with the platform.

Do not contact adjacent structures with the platform.

Do not tie the platform to adjacent structures.

Do not place loads outside the platform perimeter.

4

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233

Image 6
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessMaximum capacity GS-2668RT Electrocution HazardsTip-over Hazards Maximum capacity GS-3268RTSafety Rules GS-2668 RT GS-3268 RTFall Hazards Collision Hazards Component Damage Hazards Explosion and Fire HazardsDamaged Machine Hazards Crushing Hazards Bodily Injury HazardDecal Legend Page Controls Ground Control Panel Controls Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceMaintenance Symbols Legend Check the Engine Oil LevelHydraulic oil specifications Check the Hydraulic Oil Level Check the BatteriesScheduled Maintenance Check the Engine Coolant LevelTest Emergency Stop Function TestsAt the Ground Controls Test the Up/Down FunctionsTest the Manual Lowering Test the Up/Down Functions and the Function Enable SwitchesAt the Platform Controls Test the HornTest Drive and Braking Test Limited Drive SpeedTest the Tilt Sensor Operation Workplace Inspection Workplace InspectionStarting the Engine Operating InstructionsEmergency Stop Only use the machine as it was intendedOperation From Ground Operation From PlatformOperation From Ground with Controller Engine Stop ButtonAfter Each Use To control individual outriggers Auto Level Outriggers if equippedFall Protection Positioning machine on a slopeTransport Instructions Securing to Truck or Trailer for TransitBrake Release Operation Decals Decal InspectionPart No. Description Quantity Additional decals Model GS-2668 RT SpecificationsPlatform dimensions Drive speedsSpecifications Model GS-3268 RT+34