Genie GS-2668 RT, GS-3268 RT manual Operation From Ground, Operation From Platform

Page 24

Operator's Manual

Second Edition · Third Printing

 

 

 

 

OPERATING INSTRUCTIONS

Operation From Ground

1Turn the key switch to ground control.

2Pull out both ground and platform red Emergency Stop buttons to the on position.

3Start the engine.

To Position Platform

1Push and hold the function enable button.

2Activate the up function or the down function.

Drive and steer functions are not available from the ground controls.

Engine Idle Select

Switch

Low idle

High idle

Operation From Platform

1Turn the key switch to platform control.

2Pull out the ground and platform red Emergency Stop buttons to the position.

3Start the engine.

To Position Platform

1Move and hold a function enable/speed select switch.

2Activate the platform up/down function toggle switch in the desired direction of travel.

To Steer

1Press and hold the function enable switch.

2Turn the steer wheels with the thumb rocker switch located on the top of the control handle.

To Drive

1Press and hold the function enable switch.

2Increase speed: Slowly move the control handle off center.

Decrease speed: Slowly move the control handle toward center.

Stop: Return the control handle to center or release the function enable switch.

Use the color-coded direction arrows on the platform controls and on the platform to identify the direction the machine will travel.

Machine travel speed is restricted when the platform is raised.

Drive Select Button

Machine on incline symbol:

Low range operation for inclines

22

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233

Image 24
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum capacity GS-2668RT Maximum capacity GS-3268RTSafety Rules GS-2668 RT GS-3268 RTFall Hazards Collision Hazards Component Damage Hazards Explosion and Fire HazardsDamaged Machine Hazards Crushing Hazards Bodily Injury HazardDecal Legend Page Controls Ground Control Panel Controls Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendObserve and Obey Check the Engine Oil LevelHydraulic oil specifications Check the Hydraulic Oil Level Check the BatteriesScheduled Maintenance Check the Engine Coolant LevelFunction Tests At the Ground ControlsTest Emergency Stop Test the Up/Down FunctionsTest the Up/Down Functions and the Function Enable Switches At the Platform ControlsTest the Manual Lowering Test the HornTest Drive and Braking Test Limited Drive SpeedTest the Tilt Sensor Operation Workplace Inspection Workplace InspectionOperating Instructions Emergency StopStarting the Engine Only use the machine as it was intendedOperation From Ground Operation From PlatformOperation From Ground with Controller Engine Stop ButtonAfter Each Use Auto Level Outriggers if equipped Fall ProtectionTo control individual outriggers Positioning machine on a slopeTransport Instructions Securing to Truck or Trailer for TransitBrake Release Operation Decals Decal InspectionPart No. Description Quantity Additional decals Specifications Platform dimensionsModel GS-2668 RT Drive speedsSpecifications Model GS-3268 RT+34