Genie GS-2668 RT, GS-3268 RT Electrocution Hazards, Tip-over Hazards, Maximum capacity GS-2668RT

Page 4

Operator's Manual

Second Edition · Third Printing

 

 

 

 

SAFETY RULES

Electrocution Hazards

This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.

Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.

Voltage

Minimum Safe

Phase to Phase

Approach Distance

 

Feet

Meters

 

 

0 to 300V

Avoid Contact

 

 

 

300V to 50KV

10

3.05

 

 

 

50KV to 200KV

15

4.60

 

 

 

200KV to 350KV

20

6.10

 

 

 

350KV to 500KV

25

7.62

 

 

 

500KV to 750KV

35

10.67

 

 

 

750KV to 1000KV

45

13.72

 

 

 

Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds.

Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off.

Do not operate the machine during lightning or storms.

Do not use the machine as a ground for welding.

Tip-over Hazards

Occupants, equipment and materials shall not exceed the maximum platform capacity or the maximum capacity of the platform extension.

Maximum capacity - GS-2668RT

Platform retracted

1250

lbs

567 kg

 

 

 

 

Platform extended - Platform only

950

lbs

431 kg

Platform extended - Extension only

300

lbs

136 kg

 

 

 

Maximum occupants - ANSI and CSA

 

4

 

 

 

 

Maximum occupants - CE

 

 

 

Outdoor use

 

 

4

Indoor use only

 

 

4

 

 

 

 

1250 lbs / 567 kg Extension only

Platform only

300 lbs / 136 kg 950 lbs / 431 kg

 

 

 

Maximum capacity - GS-3268RT

 

 

 

 

 

 

Platform retracted

1000

lbs

454 kg

 

 

 

 

Platform extended - Platform only

700

lbs

318 kg

Platform extended - Extension only

300

lbs

136 kg

 

 

 

Maximum occupants - ANSI and CSA

 

4

 

 

 

 

Maximum occupants - CE

 

 

 

Outdoor use

 

 

2

Indoor use only

 

 

4

 

 

 

 

1000 lbs / 454 kg Extension only

Platform only

300 lbs / 136 kg

700 lbs / 318 kg

2

Genie GS-2668 RT & Genie GS-3268 RT

Part No. 82233

Image 4
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum capacity GS-2668RT Maximum capacity GS-3268RTSafety Rules GS-2668 RT GS-3268 RTFall Hazards Collision Hazards Explosion and Fire Hazards Component Damage HazardsDamaged Machine Hazards Bodily Injury Hazard Crushing HazardsDecal Legend Page Controls Ground Control Panel Controls Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendObserve and Obey Check the Engine Oil LevelHydraulic oil specifications Check the Hydraulic Oil Level Check the BatteriesScheduled Maintenance Check the Engine Coolant LevelFunction Tests At the Ground ControlsTest Emergency Stop Test the Up/Down FunctionsTest the Up/Down Functions and the Function Enable Switches At the Platform ControlsTest the Manual Lowering Test the HornTest Limited Drive Speed Test Drive and BrakingTest the Tilt Sensor Operation Workplace Inspection Workplace InspectionOperating Instructions Emergency StopStarting the Engine Only use the machine as it was intendedOperation From Ground Operation From PlatformEngine Stop Button Operation From Ground with ControllerAfter Each Use Auto Level Outriggers if equipped Fall ProtectionTo control individual outriggers Positioning machine on a slopeSecuring to Truck or Trailer for Transit Transport InstructionsBrake Release Operation Decal Inspection DecalsPart No. Description Quantity Additional decals Specifications Platform dimensionsModel GS-2668 RT Drive speedsSpecifications Model GS-3268 RT+34