Operator's Manual | Second Edition · Third Printing |
|
|
|
|
Maintenance
Observe and Obey:
Only routine maintenance items specified in this manual shall be performed by the operator.
Scheduled maintenance inspections shall be completed by qualified service technicians, according to the manufacturer's specifications and the requirements specified in the responsibilities manual.
Maintenance Symbols Legend
The following symbols have been used in this manual to help communicate the intent of the instructions. When one or more of the symbols appear at the beginning of a maintenance procedure, it conveys the meaning below.
Indicates that tools will be required to perform this procedure.
Indicates that new parts will be required to perform this procedure.
Indicates that a cold engine is required before performing this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential to good engine performance and service life. Operating the machine with an improper oil level can damage engine components.
Check the oil level with the engine off.
1 Check the oil level dipstick.
Result: The oil level should be at the FULL mark on the dipstick. Add oil as needed.
Kubota DF-752 Engine
Oil viscosity requirements
Use oils meeting API classification SF (labeled SF/CC or SF/CD) for improved wear protection. Units ship with
Kubota D-905 Engine
Oil viscosity requirements
Engine oil should have properties of API classification CC/SE, CD/SE, CC/SF or CD/SF grades. Units ship with
14 | Genie | Part No. 82233 |