Genie GS-3268 RT, GS-2668 RT manual Safety Rules, Do Not Operate Unless

Page 3

Second Edition · Third Printing

Operator's Manual

 

 

 

 

Safety Rules

Danger

Failure to obey the instructions and safety rules in this manual will result in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1 Avoid hazardous situations.

Know and understand the safety rules before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey:

Manufacturer's instructions and safety rules—safety and operator's manuals and machine decals

employer's safety rules and worksite regulations

applicable governmental regulations

You are properly trained to safely operate the machine.

Part No. 82233

Genie GS-2668 RT & Genie GS-3268 RT

1

Image 3
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesMaximum capacity GS-3268RT Electrocution HazardsTip-over Hazards Maximum capacity GS-2668RTSafety Rules GS-3268 RT GS-2668 RTFall Hazards Collision Hazards Component Damage Hazards Explosion and Fire HazardsDamaged Machine Hazards Crushing Hazards Bodily Injury HazardDecal Legend Page Controls Ground Control Panel Controls Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Engine Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Hydraulic Oil Level Check the Batteries Hydraulic oil specificationsCheck the Engine Coolant Level Scheduled MaintenanceTest the Up/Down Functions Function TestsAt the Ground Controls Test Emergency StopTest the Horn Test the Up/Down Functions and the Function Enable SwitchesAt the Platform Controls Test the Manual LoweringTest Drive and Braking Test Limited Drive SpeedTest the Tilt Sensor Operation Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsEmergency Stop Starting the EngineOperation From Platform Operation From GroundOperation From Ground with Controller Engine Stop ButtonAfter Each Use Positioning machine on a slope Auto Level Outriggers if equippedFall Protection To control individual outriggersTransport Instructions Securing to Truck or Trailer for TransitBrake Release Operation Decals Decal InspectionPart No. Description Quantity Additional decals Drive speeds SpecificationsPlatform dimensions Model GS-2668 RTModel GS-3268 RT Specifications+34