Genie S-85, S-80, 43650 manual Operator’s Manual

Page 1

Operator’s Manual	Second Edition
Operator’s Manual	Fifth Printing
with Maintenance Information	Part No. 43650

Image 1

Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsMaximum allowable manual force CE Maximum allowable side force-ANSI & CSABodily Injury Hazard Fall HazardsComponent Damage Hazards Collision HazardsDamaged Machine Hazards Explosion and Fire HazardsDecal Legend Ground Control Panel ControlsPlatform Control Panel Controls Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionMaintenance Symbols Legend MaintenanceObserve and Obey Check the Engine Oil LevelCheck the Hydraulic Oil Level Hydraulic oil specificationsDeutz F4L 1011F Engine Oil Capacity Including filter Perkins 704-30 Engine Oil Capacity Including filterFull mark Maintenance Inspection Report Scheduled MaintenanceCheck the Tire Pressure ScheduleAt the Ground Controls Function TestsTest Emergency Stop Test the Extendable AxlesTest the Tilt Sensor Test the Machine FunctionsTest the Foot Switch Test the Service HornAt the Platform Controls Test Auxiliary ControlsTest the Steering Test Machine FunctionsTest Drive and Braking Test Limited Drive Speed Test the Drive Enable SystemTest the Lift/Drive Select Switch if equipped Work Place Inspection Work Place InspectionStarting the Engine Operating InstructionsEmergency Stop Only use the machine as it was intendedExtendable Axles Auxiliary ControlsOperation from Ground To Position PlatformOperation from Platform Drive EnableTo Steer To DriveCheck Engine Light if equipped Engine Idle Select rpmStopping the Engine After Each UseTransport Instructions Free-wheel Configuration for WinchingSecuring to Truck or Trailer for Transit Decal Inspection DecalsDecal Description Quantity Engine Side Ground Controls Side Drive Chassis PlatformModel SpecificationsDrive speeds Distributed By

Operator’s Manual

with Maintenance Information