Second Edition · Fifth Printing | Operator's Manual |
|
|
|
|
Test Machine Functions
38 Move the lift/drive select switch to the lift position (if equipped).
39 Press down the foot switch.
40Activate each machine function control handle or toggle switch.
Result: All boom/platform functions should operate through a full cycle.
Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the boom is raised or extended past the drive speed limit switches.
Test the Steering
41 Move the lift/drive select switch to the drive position (if equipped).
42 Press down the foot switch.
43Depress the thumb rocker switch on top of the drive control handle in the direction identified by the blue triangle on the control panel.
Result: The steer wheels should turn in the direction that the blue triangles point on the drive chassis.
44Depress the thumb rocker switch in the direction identified by the yellow triangle on the control panel.
Result: Steer wheels should turn in the direction that the yellow triangles point on the drive chassis.
FUNCTION TESTS
Test Drive and Braking
45 Move the lift/drive select switch to the drive position (if equipped).
46 Press down the foot switch.
47Slowly move the drive control handle in the direction indicated by the blue arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the blue arrow points on the drive chassis, then come to an abrupt stop.
48Slowly move the drive control handle in the direction indicated by the yellow arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the yellow arrow points on the drive chassis, then come to an abrupt stop.
Note: The drive brakes must be able to hold the machine on any slope it is able to climb.
Part No. 43650 | Genie | 19 |