Operator's Manual | Second Edition· Fifth Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Auxiliary Controls
Use auxiliary power if the primary power source (engine) fails.
1Turn the key switch to ground or platform control.
2Pull out the red Emergency Stop button to the ON position.
3Move the lift/drive select switch to the lift position (if equipped) when operating the auxiliary controls from the platform.
4Press down the foot switch when operating the auxiliary controls from the platform.
5Simultaneously hold auxiliary power switch ON and activate desired function.
The drive function will not operate with auxiliary power.
Extendable Axles
Be sure the machine is on a firm, level surface. Use shoring material under the jack foot pad as required.
1Push and hold the jack control handle to extend the jack. Do not release handle.
2Push the axle control handle to extend the axle. Pull the axle control handle to retract the axle.
3Release the handles when the axle is fully extended or retracted.
4Pull the jack control handle to retract the jack.
5Repeat for other axle.
Operation from Ground
1Turn the key switch to ground control.
2Pull out the red Emergency Stop button to the ON position.
3Gasoline/LPG models: Choose fuel by moving fuel select switch to desired position.
4Start the engine.
To Position Platform
1Extend the axles.
2Hold the function enable switch to either side.
3Move the appropriate toggle switch according to markings on the control panel.
Drive and steer functions are not available from the ground controls.
Machines equipped with Platform Level Control Disable Function: The platform level toggle switch will not operate when the boom is raised or extended past the drive speed limit switches.
24 | Genie | Part No. 43650 |