Genie S-85, S-80, 43650 manual Electrocution Hazards, Tip-over Hazards

Operator's Manual Second Edition· Fifth Printing

SAFETY RULES

Electrocution Hazards

This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.

Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.

Voltage	Minimum Safe
Phase to Phase	Approach Distance
	Feet	Meters
0 to 300V	Avoid Contact
300V to 50KV	10	3.05
50KV to 200KV	15	4.60
200KV to 350KV	20	6.10
350KV to 500KV	25	7.62
500KV to 750KV	35	10.67
750KV to 1000KV	45	13.72

Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds.

Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off.

Do not operate the machine during lightning or storms.

Do not use the machine as a ground for welding.

Tip-over Hazards

Occupants and equipment shall not exceed the maximum platform capacity.

Maximum platform capacity
S-85	500 lbs	227 kg
Maximum platform capacity
S-80 with 8 Ft Platform	500 lbs	227 kg
Maximum platform capacity
S-80 with 6 Ft Platform	600 lbs	272 kg
Maximum platform capacity
S-80 with 6 Ft Platform
with foam-filled tires and proper
counterweight configuration	750 lbs	340 kg
Maximum occupants		2

2 Genie S-80 & Genie S-85 Part No.43650