Genie 43650, S-80, S-85 manual Contents, Contact us

Page 2

Operator's Manual	Second Edition· Fifth Printing

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries.

Contents
	Page
Safety Rules	1
Controls	7
Pre-operation Inspection	10
Maintenance	12
Function Tests	16
Work Place Inspection	22
Operating Instructions	23
Transport Instructions	27
Decals	28
Specifications	30
Contact us:
Internet: http://www.genielift.com
e-mail: techpub@genieind.com

®

Copyright © 1994 by Genie Industries

First Edition: First Printing, August 1994

Second Printing, February 1995

Third Printing, March 1996

Fourth Printing, September 1996

Fifth Printing, October 1996

Second Edition: First Printing, November 1996

Second Printing, March 1997

Third Printing, March 1998

Fourth Printing, August 1999

Fifth Printing, July 2000

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "S" is a trademark of Genie Industries.

These machines comply with

ANSI/SIA 92.5-1992.

Printed on recycled paper

Printed in U.S.A.

Genie S-80 & Genie S-85

Part No. 43650

Image 2

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsMaximum allowable side force-ANSI & CSA Maximum allowable manual force CEFall Hazards Bodily Injury HazardCollision Hazards Component Damage HazardsDecal Legend Explosion and Fire HazardsDamaged Machine Hazards Controls Ground Control PanelPlatform Control Panel Controls Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceMaintenance Symbols Legend Check the Engine Oil LevelDeutz F4L 1011F Engine Oil Capacity Including filter Hydraulic oil specificationsCheck the Hydraulic Oil Level Perkins 704-30 Engine Oil Capacity Including filterFull mark Check the Tire Pressure Scheduled MaintenanceMaintenance Inspection Report ScheduleTest Emergency Stop Function TestsAt the Ground Controls Test the Extendable AxlesTest the Machine Functions Test the Tilt SensorAt the Platform Controls Test the Service HornTest the Foot Switch Test Auxiliary ControlsTest Drive and Braking Test Machine FunctionsTest the Steering Test the Drive Enable System Test Limited Drive SpeedTest the Lift/Drive Select Switch if equipped Work Place Inspection Work Place InspectionEmergency Stop Operating InstructionsStarting the Engine Only use the machine as it was intendedOperation from Ground Auxiliary ControlsExtendable Axles To Position PlatformTo Steer Drive EnableOperation from Platform To DriveStopping the Engine Engine Idle Select rpmCheck Engine Light if equipped After Each UseSecuring to Truck or Trailer for Transit Free-wheel Configuration for WinchingTransport Instructions Decal Description Quantity DecalsDecal Inspection Ground Controls Side Drive Chassis Platform Engine SideDrive speeds SpecificationsModel Distributed By