Subaru Robin Power Products RGX405, RGX405D Frame, It is not necessary to re, Move the air guide

OrderItem

I	I	I
Procedure	Remarks	TOOi
		I

3Frame

(1) Remove the box stay.

69 bolt. . . 2 PCS.

, It is not necessary to re-	10 mm spanner
move the air guide.

I

(2)	Remove the side plates, front and rear.
(3)	Remove the generator mounting nuts.

I RGX305, RGX305D: Remove the nuts that fasten the engine and rubber

/mount and the nuts that fasten the generator and rubber mount.

89 nut . . .4 PCS.

RGX405: RGX405D, RGX505, RGX

505D : Remove the nuts that fasten the engine to the engine base, and the nuts that fasten the rubber mount the

	generator. (See Fig. 1O-7.)
	- ,
I	ag nut . . .6 PCS.
(4)	Remove the generator.
	(See Fig. 10-8.)
	Lift the generator with a chain block,
	and remove the frame.
(5) Remove the rubber mount.
	RGX405, RGX405D, RGX505, RGX
!	505D: Remove the nuts that fasten
	the engine baseand rubber mount.

I	Twist the rubber mount and take it
	off.

Fig. 10-7

Black special bolts are used.

\

(

I

I

/The bolts are welded to the engine base.

!

I

Be careful of the genera-

’tor balance.

j

Rubber mount is fastened

’with the nuts welded to the bottom of the frame.

\

i

Fig. 10-8

10 mm spanner or box spanner

13 mm spanner

I

1

I

I

i 13 mm spanner or

/ box spanner

:

-45-