Subaru Robin Power Products RGX3510 manual Tightening torque, Control BOX

Install the engine and alternator assembly into the frame.

Put the engine and alternator assembly into the frame from the side of it. Tightenthenutsoverthemountrubberbolts

to fix.

Tightening torque

1 1.8- 13.7 Nom

:.120- 140 kg*cm .i

’, 8.7 - 10.1 ft*lb ;

Fig. 10-24

NOTE : When tightening the nuts, slightly lift the engine and alternator assembly so that the weight is not applied to the mount rubbers.

( 3 ) Attach the side plate frame.

M 6 x 10 mm bolt ..............2 pcs.

Attach fuel tank mount rubbers to side plates. The.nuts for mount rubbers are welded to side plates.

3.9- 5.9 Nom

.... 2.9-4.3 ft4b :

Fig. 10-25

10-3-6 CONTROL BOX

Mount the control box assembly to the frame.

Refer to Section 10-5for disassembly, checking and reassembly proceduresof the control box.

(2)Connect the wires drawn out from the statorto the wires from the controlbox. Connect the oil sensor u-ires at the same time.

NOTE :Connect thewires of the same color.

- 62 -