Briggs & Stratton 40221 manual Save These Instructions, Installer Responsibilities, Introduction

Page 5

INSTALLATION

SAVE THESE

INSTRUCTIONS

This manual contains important instructions that should be followed during installation and maintenance of the generator and battery.

•Follow a regular schedule in maintaining, caring for and using your Home Generator System, as specified in this manual.

INSTALLER RESPONSIBILITIES

• Read and observe the safety rules.

INTRODUCTION

Thank you for your purchase of a Briggs & Stratton Home Generator System.This product is intended for use as an optional standby system which provides an alternate source of electric power and to serve loads such as heating, refrigeration systems, and communication systems that, when stopped during any power outage, could cause discomfort or the like.This product DOES NOT qualify for emergency standby as defined by NFPA 70 (NEC).

This manual is an important document and should be retained by the owner after installation has been completed.

This manual contains installation, startup and adjustment instructions for a Home Generator System that supplies 120/240 Volt, single phase, 60Hz devices.The Home Generator System may be operated on LP or natural gas fuel.

Every effort has been made to ensure that the information in this manual is both accurate and current. However, the manufacturer reserves the right to change, alter or otherwise improve the generator at any time without prior notice.

Briggs and Stratton has made every effort to provide for a safe, streamlined and cost-effective installation. Because each installation is unique, it is impossible to know of and advise the trade of all conceivable procedures and methods by which installation might be achieved. Neither could we know of possible hazards and/or the results of each method or procedure. For these reasons,

Only current licensed electrical and plumbing contractors should attempt Home Generator System installations. Installations must strictly comply with all applicable codes, industry standards and regulations.

CUSTOMER

•Read and follow the instructions given in this manual.

IMPORTANT: If operating the generator below 40°F, it is recommended that a battery warmer be installed. If operating the generator below 32°F, a battery warmer MUST be installed. This item is available at your local servicing dealer.

INSTALLATION

ASSISTANCE

For the Home Owner:

To help you make informed choices and communicate effectively with your installation contractor(s),

Read and understand the

Owner Orientation Section of this manual

BEFORE contracting or starting

your Home Generator System installation.

To arrange for proper installation, contact the store at which you purchased your Briggs & Stratton Home Generator System, your dealer, a licensed electrician or your utility power provider.

The Home Generator System Warranty is VOID

unless the generator is installed by licensed

electrical and plumbing professionals.

For the Installing Dealer/Contractor:

For most applications, this manual contains all the information required to properly install and start the Home Generator System.This manual also describes essential circuit selection, routine operation and owner maintenance procedures.

If you need more information, call 1-800-743-4115, between 8:00 AM and 5:00 PM CT.

The Emission Control System for this generator is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (CARB).

RESPONSIBILITIES

•Read and follow the instructions given in this manual, especially the section regarding selecting essential circuits.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Home Generator System Table of Contents Hazard Symbols and Meanings Important Safety InstructionsDo not dispose of battery in a fire Operate generator only outdoorsSafety Rules Installation Assistance Installer ResponsibilitiesSave These Instructions IntroductionOil Fill BatteryKnow Your Home Generator System START/RUN/STOP Know Your Control PanelOwner Orientation InstallationProcedures Home Generator System Location Lifting the GeneratorGenerator Clearances General Location GuidelinesDevice Running Watts Essential CircuitsEssential Circuit Selection Disconnect Box Mounting Guidelines Fuel Inlet DimensionsRemovable Roof and Access Door Gaseous Fuel System From Fuel Fuel ConsumptionStandby Generator Load10ft 15ft 20ft 30ft 40ft 50ft 60ft 70ft 80ft 90ft 100ft Fuel Pipe SizingWithdrawal Rate 32F 20F 10F 30F 40F Fuel Comparison ChartPhysical Properties Propane Natural Gas Before Initial START-UP Wire ConnectionsCharging the Battery Battery ConnectionServicing the Battery Fuel Supply SystemTo configure the fuel system for LP use Installation InspectionInstall 15 Amp fuse in control panel Fuel System SelectionRated Maximum Power LP SpecificationsSystem Operation Servicing the GeneratorChanging Engine Oil and Filter Generator MaintenanceChanging Oil Changing Oil FilterStorage To Clean the GeneratorWhen Calling the Factory Problem Cause Correction TroubleshootingPage Schematic Wiring Diagram Exploded View Main Unit Optional Accessories Not Illustrated Parts List Main UnitDescription Items Not IllustratedExploded View Enclosure ASSY, Panel, Right side Parts List EnclosureASSY, Panel, Left Side COVER, Oil Filter DrainExploded View Control Panel DECAL,Warning Electrical Shock Parts List Control PanelSCREW, 10 x 32 x 1 Phillips Truss WASHER, Shakeproof Int /4 M6HARNESS,Wire DC Charge Exploded View and Parts List AlternatorADAPTER, Mounting, Alternator SCREW, M5 .8 x 10 TaptiteLimited Warranty Especificaciones Operación DE Sistema Tabla DE ContenidoAntes DEL Arranque Inicial Advertencia PeligroSímbolos de Peligro y Significados Gases Tóxicos Manual de OperarioLos generadores producen un voltaje muy poderoso PrecauciónIntroducción Conserve Estas InstruccionesResponsabilidades DEL Cliente Responsabilidades DEL InstaladorEtiqueta del Motor Tapón de Llenado y Varilla Conozca SU Generador Doméstico DE ReservaDe Nivel de Aceite Tapón de Llenado y Varilla de Nivel de Aceite PermiteDisyuntor Interruptor Conozca EL Panel DE Control DEL SistemaProcedimientos DE Instalación Orientación Para EL PropietarioUbicación del Sistema de Generador de Doméstico Elevación del GeneradorDistancias Desde el Generador Pautas Generales para la Ubicación del GeneradorDispositivo Vatiaje de Circuitos FundamentalesSelección de los Circuitos Fundamentales Techo y Puerta de Acceso Desmontables Dimensiones de la Entrada de CombustibleDirectrices de Montaje del Cuadro de Desconexión Sistema DE Combustible Gaseoso Advertencia Gas Natural Vapor de PL Consumo de CombustiblePropano Líquido PL peso específico = Dimensiones de la Cañería de CombustibleGas Natural peso específico = Tasa de consumo 32F 20F 10F 30F 40F Cuadro de Comparación de CombustiblesPropiedades físicas Propano Gas natural Antes DEL Arranque Inicial Conexiones DE CablesSistema de Suministro de Combustible Conexión de la BateríaCargar la Batería Servicio la BateríaSelección DEL Sistema DE Combustible Para configurar el sistema de combustible para uso de PLArranque Inicial SIN Carga Inspección Posterior a LA InstalaciónMantenimiento del Generador EspecificacionesOperación DE Sistema Cambio del Aceite del Motor y del Filtro Mantenimiento DEL GeneradorCambio del Filtro de Aceite Cambio del AceiteSi Llama a la Fábrica AlmacenamientoPara Limpiar el Generador Reparacion DE Averias Notas Notas Garantía Limitada Table DES Matières Avertissement Symboles de Danger et MoyensEmanations Toxiques Choc Électrique Recul ExplosionNE touchez PAS les fils dénudés ou les boîtiers Aide À Linstallation Responsabilités DE LinstallateurConservez CES Instructions IntroductionFiltre à Air Et Jauge dHuile Filtre à lHuile FAMILIARISEZ-VOUS Avec Votre Groupe ÉlectrogèneInterrupteur DisjoncteurConseils AU Propriétaire Procédures DinstallationDirectives Générales Concernant lEmplacement Emplacement du Génératrice d’état d’AttenteSoulèvement de la Génératrice Dégagement Autour de la GénératriceAppareil Watts Circuits EssentielsSélection des Circuits Essentiels Toit Amovible et Porte dAccès Dimensions de lOrifice dAdmission du CombustibleDirectives dAssemblage du Boîtier de Débranchement LE Système DE Combustible Gazeux Avertissement Le groupe électrogène a été réglé en usine pour Consommation de CombustibleIl faudrait inclure une sortie pour manomètre Gas Naturel Vapeur PLGaz de Pétrole Liquéfié GPL densité = 1,50 Grosseur du Tuyau de CombustibleGaz Naturel densité = 0,65 Propriétés physiques Propane Gaz naturel Charte de Comparaison des CombustiblesAvant LE Démarrage Initial Raccords DE FilsSystème dAlimentation en Combustible Branchement de la BatterieRechargez la Batterie Entretien de la BatterieDémarrage Initial Sans Vérification InstallationSélection DU Système DE Combustible Entretien du Génératrice CaractéristiquesFonctionnement DU Système Changement dHuile à Moteur et de Filtre Entretien DU GénératriceChangement du filtre à huile Vidange de lHuileCommunications avec le Fabricant RemisagePour Nettoyer le Générateur Dépannage Remarques Garantie Limitée

40221 specifications

The Briggs & Stratton 40221 is a prominent model of portable generator that is well-regarded for its reliability, performance, and innovative features. Designed for both home and professional use, this generator stands out due to its robust construction and versatile applications, making it an excellent choice for homeowners, contractors, and outdoor enthusiasts alike.

One of the main features of the Briggs & Stratton 40221 is its powerful 305cc engine, which delivers a notable output of 3,250 running watts and a peak wattage of 3,750 watts. This capacity ensures that it can effectively power essential appliances during outages or provide energy for tools and equipment on job sites. The generator’s ability to handle a variety of loads makes it suitable for a range of applications, from powering refrigerators and lights to operating power tools.

The Briggs & Stratton 40221 utilizes advanced inverter technology, which is designed to produce clean and stable power. This technology allows users to safely run sensitive electronics such as laptops and smartphones without the risk of damage. The inverter system also provides excellent fuel efficiency, meaning users can run the generator longer on a single tank of gas, enhancing convenience and cost-effectiveness.

Another key characteristic of the 40221 is its lightweight and portable design. Equipped with convenient folding handles and solid rubber wheels, it can be easily transported to job sites, campsites, or stored away during periods of non-use. The generator’s compact frame doesn’t compromise its durability; it is built to withstand outdoor conditions, thanks to its reinforced structure and weather-resistant design.

Safety features are a fundamental aspect of the Briggs & Stratton 40221. It comes with an Automatic Voltage Regulation (AVR) system that helps maintain consistent power output while protecting connected devices from voltage spikes. Additionally, it includes built-in circuit breakers to prevent overload and a low-oil shutdown feature, which stops the engine to avoid damage when oil levels get too low.

The Briggs & Stratton 40221 is equipped with multiple outlets, including 120V AC outlets and a 12V DC outlet for straightforward connectivity to various devices. With user-friendly controls and a clear display for monitoring fuel levels and runtime, this generator is designed for ease of use, appealing to both seasoned and novice users.

In summary, the Briggs & Stratton 40221 combines power, efficiency, portability, and durability into a single unit, making it a practical choice for anyone needing reliable backup power or on-the-go energy solutions. Whether for emergencies or everyday use, it delivers dependable performance that stands the test of time.
Top Page Image Contents