Murray 1737920, 1695722 manual Change the Spark Plug, Remove the Snow Hood

Page 21

 

 

 

 

MAINTENANCE

CHANGE THE SPARK PLUG

 

B

A

 

Remove the Snow Hood

 

 

 

 

 

1.

Remove the choke control knob (A, Figure 19).

 

 

 

 

2.

Remove the safety key (B).

 

D

 

 

3.

Remove the mounting screws (A, Figure 20).

 

 

 

4.

Slowly remove the snow hood (B) Make sure that the primer button

E

 

 

 

hose (C) and the ignition wire (D) are not disconnected.

 

 

 

 

5.

The spark plug (E) can now be accessed.

 

 

 

 

6.

To install the snow hood, first make sure that the primer button hose

 

 

 

 

and the ignition wire are connected.

 

 

 

C

7.

Mount the snow hood to the engine and secure with the mounting

 

 

 

screws.

 

 

 

 

8.

Connect the choke control knob (A, Figure 21) with the choke shaft

 

 

 

 

on the carburetor (B). Make sure the choke control knob is properly

 

 

 

 

installed. If the choke control knob is not installed correctly, the choke

 

 

 

 

will not operate.

 

 

 

 

9.

Install the safety key (C).

 

Removing the Snow Hood

 

Figure 20

 

 

 

 

 

A

 

 

 

 

 

 

 

A

B

C

 

 

 

 

 

 

B

 

 

 

 

Snow Thrower Engine

Figure 19

Connecting Choke Control Knob

 

Figure 21

 

 

 

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Manual Part No Operator’s ManualDate Purchased Where to Find UsTable of Contents Operator Safety Engine Stop Slow Engine Run FastTraction Control Engage DownOperation and Equipment Safety Moving Parts Maintenance and Storage Auger Control Decal Main Dash Decal Shift DecalEngine and Snow Thrower Controls Features and ControlsSnow Thrower Controls Features and ControlsBefore Operating Snow Thrower OperationOperate the Snow Thrower Stop the Snow ThrowerControl Levers Traction Lock Pins Traction Lock PinsCheck the OIL Before Starting Engine Checking the OilFill the Fuel Tank Start the EngineStarting Engine Stopping Engine Stop the EngineOperating Tips Clear a Clogged Discharge ChuteMaintenance Cable AdjustmentAfter Each USE Lubricate Auger Gear BOX Adjust the Drag on the Chute RotationLubricate Auger Shaft Fittings CHECK/LUBRICATE FREE-HAND LinkageOil Drain Plug Engine MaintenanceRemove the Snow Hood Change the Spark PlugAdjusting Skid Height Adjust Skid HeightBelt Adjustment SecondsCheck Tension on Auger Drive Belt Check and Adjust the Cables Belt Guide AdjustmentAdjusting Belt Drive Adjusting Auger Drive CableTraction Drive Cable Auger Shear PIN Replacement Storage OFF Season StorageRemove from Storage Problem Look for Remedy TroubleshootingWarranties Limited WarrantyBriggs & Stratton Emissions Control Warranty Provisions Specifications Page Réf. fab Description Manuel d’UtilisationMoteur Souffleuse à neigeDate d’achat Où nous trouverTable DES Matières Protection des oreilles Surface chauderecommandée pour une Ou modéréesRotatifs Marche avant Point mort Marche arrière Manette de tarièreSécurité de l’utilisation et de l’équipement Dange Sécurité du moteur suite Étiquettes du moteur Réf Réf Auger Étiquette Étiquette Tableau de bord principalÉtiquettes de sécurité Commandes DU Moteur ET DE LA Souffleuse À Neige Commandes de moteurPoignée de lanceur Sert à démarrer le moteur à la main Commandes de la soufleuse à neige Fontions ET CommandesAvant D’UTILISATION Souffleuse À Neige Ne pas gonfler les pneus-dessus de la pression recommandéeContrôler LES Pneus Vérifier la pression dair des pneusArrêter LA Souffleuse À Neige Utilisation DE LA Souffleuse À NeigeNeige mouillée, lourde, fondante, très profonde Transport uniquementEt au-dessus Traction goupille de sûretéEt en dessous Contrôler le niveau d’huileDémarrer LE Moteur Remplir LE Réservoir D’ESSENCEArrêter LE Moteur Toujours utiliser un outil de nettoyage, pas les mains Conseils D’UTILISATIONOutil de nettoyage Autant que possible, projeter la neige dans le sens du ventAprès Chaque Utilisation Contrôles de graissage Graissage DE L’ARBRE DE VIS Sans FINGraissage de la boîte d’engrenage de vis sans fin Pignon de rotation de goulotteEntretien DU Moteur Voir les huiles recommandées dans le tableau ci-contreEt au-dessus E W30 Et en dessous Synthétique 5W30 Bouchon de vidange d’huileChanger LA Bougie D’ALLUMAGE La bougie E est à présent accessibleDéposer le capot à neige FixationRégler LA Hauteur DES Patins Régler ou changer la bougieLes patins se règlent de la manière suivante Régler la hauteur des patinsAjustement DES Courroies Courroie d’entraînement de tractionCourroie d’entraînement de vis sans fin Contrôle ET Réglage DES Câbles Ajustement DU Guide DE CourroieCâble d’entraînement de vis sans fin Réglage guide de courroieCâble de commande de traction Changer LES Goupilles DE Cisaillement DE VIS Sans FIN Remisage Hors Saison Sortir LA Souffleuse À Neige DU RemisageLubrifier arbre hexagonal et chaînes Le moteur a des ratés Démarrage difficileMoteur est chaud Le moteur caleGaranties Novembre Bougie en platine longue durée Dispositif d’allumage Informations concernant la puissance théorique du moteurDéflecteur de goulotte Manuel Rotation de la goulotte Type d’entraînement

1737920, 1695722 specifications

Murray 1737920 and 1695722 represent two significant advancements in the realm of smart technology, particularly in the area of home automation and energy management. These devices integrate cutting-edge features designed to enhance user experience while optimizing energy efficiency.

One of the main characteristics of Murray 1737920 is its intelligent energy management system, which utilizes real-time data analytics to monitor energy consumption patterns. The device employs machine learning algorithms to intelligently predict energy requirements, allowing users to reduce waste and lower their utility bills. Additionally, it has a user-friendly interface that provides insights into energy usage, enabling homeowners to make informed decisions about their consumption.

Murray 1695722, on the other hand, focuses more on home automation and security. With built-in Wi-Fi connectivity, it allows users to control various appliances remotely through a dedicated mobile application. This feature not only enhances convenience but also allows for enhanced security by enabling users to monitor their homes in real-time. The device is equipped with motion sensors and alert systems that can notify homeowners of any unusual activity, adding an extra layer of protection.

Both devices integrate seamlessly with existing smart home ecosystems, supporting popular communication protocols such as Zigbee and Z-Wave. This compatibility allows users to expand their systems by adding other smart devices, creating a fully integrated home automation experience.

In terms of installation, both Murray models are designed to be user-friendly. They typically come with comprehensive instructions, and many features can be accessed with minimal technical knowledge. The focus on ease of use extends to their maintenance, with straightforward troubleshooting and support available through the manufacturers.

Another important feature of both devices is their commitment to sustainability. By helping families monitor and manage their energy consumption, they play a crucial role in promoting more eco-friendly practices within households. Combined, Murray 1737920 and 1695722 stand out as leaders in smart home technology, emphasizing efficiency, security, and user-centric design principles that cater to the evolving needs of modern homeowners. These innovations represent a significant step forward in creating energy-conscious and secure living environments.
Top Page Image Contents