Land Pride RBT55120 manual Hydraulic Selector Valve, Kit Bundle

Table of Contents

Section 2: Options, Assembly & Set-Up

Land Pride

Hydraulic Selector Valve

Refer to Figure 2-6:

An optional hydraulic selector valve kit may be purchased that bolts to the front hitch frame. This kit provides a way to operate 2 cylinders with one outlet, thereby reducing the number of outlets at the tractor by one. See also “Tractor Requirements” on page 7.

Kit Bundle

300-154A Double Selector Valve Assembly

1.Attach diverter valve stand (#16) to the hitch with two 1/2"-13 x 1 3/4" GR5 hex head cap screws (#17), spring lock washers (#10) and hex nuts (#11). Tighten nuts to the correct torque.

2.Attach adjustment tube (#13) to the stand with one 1/2"-13 x 3/4" GR5 hex head cap screws (#15). Tighten bolt to the correct torque.

3.Attach extension arm (#14) to adjustment tube with two 3/8”-16 x 3/4” GR5 hex head cap screws (#12). Tighten bolts to the correct torque.

4.Attach valve base plate (#6) to extension arm (#14) with two 1/2” flat washers (#9), lock washer (#10) and 3/8”-13 hex nut (#11). Tighten nut to the correct torque.

5.Attach double selector valve (#4) to valve base plate (#6) with two 3/8"-16 x 3" GR5 hex head cap screws (#5), spring lock washers (#7) and hex nuts (#8). Tighten nuts to the correct torque.

6.Apply teflon tape to the pipe threads of six

3/4 x 1/2MNPT elbows (#1) and screw them into the double selector valve (#4) as shown. Tighten to correct orientation.

7.Attach blade offset hydraulic hoses (#18) to the right side elbows.

8.Attach hydraulic hoses (#19) from one of the other cylinders to the left elbows.

9.Attach tractor connected hydraulic hoses (#2) to the top elbows.

10.Thread hydraulic adapters (#3) (couplings supplied by customer) onto hydraulic hoses (#2) and tighten.

25509

Hydraulic Selector Valve Assembly

Figure 2-6

14 RBT55120 Rear Blades 301-172M 5/21/07