Application, Using This Manual, Introduction

Table of Contents

Introduction

Land Pride

Land Pride welcomes you to the growing family of new product owners.

This 3-Way Rear Blade has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance and safe operating practices will help you get years of satisfactory use from the machine.

Application

Land Pride’s RBT55120 Series 3-Way Rear Blade is built tough from the ground up for applications ranging from landscaping, construction, snow removal, feedlot cleaning and all-around farm use. By using hydraulics at all three positions, time can be utilized efficiently by making changes on the go. Available options include single or double hydraulic gauge wheels, side plates for holding dirt in and skid shoes for blade protection.

See “Section 6: Specifications & Capacities” on page

23 and “Section 7: Features & Benefits” on page 24 for additional information and performance enhancing options.

Using This Manual

•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.

•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.

•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded, free-of-charge from our website at www.landpride.com or printed from the Land Pride Service & Support Center by your dealer.

Terminology

“Right” or “Left” as used in this manual is determined by facing forward in the direction the machine will operate while in use unless otherwise stated.

Definitions

NOTE: A special point of information that the operator must be aware of before continuing.

IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.

Owner Assistance

The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.

If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the Rear Blade.

The parts on your 3-Way Rear Blade have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your Rear Blade require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.

17837

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new 3- Way Rear Blade. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:

1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.

2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.

3.For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

RBT55120 Rear Blades 301-172M

5/21/07