Land Pride RBT55120 manual Safety at All Times

Page 3

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

wheels. This could result in injury

or equipment damage.

For Your Protection

Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

Lower machine to ground, put tractor in park, turn off engine, and remove the key.

Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

5/21/07

RBT55120 Rear Blades 301-172M

1

Image 3
Contents Rear Blades Table of Contents Safety at All Times Use a Safety Chain Practice Safe MaintenanceTransport Machinery Safely Wear Protective Equipment Avoid High Pressure Fluids HazardKeep Riders Off Machinery 818-339C Safety Labels818-230C Introduction Using This ManualApplication Owner AssistanceTractor Requirements Assembly & Set-UpRefer to Figure Hitch, Frame & BladeCategory ll Tractor Hook-UpCategory lll Standard & Quick HitchOptions, Assembly & Set-Up Blade Offset CylinderBlade Angling Cylinder Blade Tilting Cylinder Manual Offset, Angling and Tilting Manual Blade Angling Manual Blade OffsetManual Blade Tilting Kit Bundles Gauge WheelRatchet Jack Option Hydraulic Cylinder OptionKit Bundle Hydraulic Selector ValveSkid Shoe End PlatesWear Plates Blade Angle and Reversing AdjustmentsBlade Pitch Blade OffsetHydraulic Gauge Wheel Adjustment Manual Gauge Wheel AdjustmentTransporting Operating ChecklistOperating Procedures Operating Check ListGeneral Operating Instructions Hours MaintenanceMaintenance & Lubrication LubricationFront Pivot Shaft Moldboard and BladeRatchet Jack Gauge Wheel Front Pivot Gauge Wheel Caster TubeGauge Wheel Hub Specifications & Capacities RBT55120 ModelRBT55120 Features Benefits Features & BenefitsTorque Values Chart AppendixIn-tpi · m Ft-lb Mm x pitch 26 RBT55120 Rear Blades 301-172M Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA