RAC Reference Documentation
In addition to this guide, the following documentation supports the Model 5399 and Model 8000 RAC:
Nortel Networks 5399 Access Switch Hardware Installation Guide (308679-A Rev. 00) -- Describes how to install the Model 5399 RAC, set the IP address, and make the RAC operational using factory defaults.
Installing the Nortel Networks 8000 Access Switch (308680-A Rev. 00) -- Describes how to install the Model 8000 RAC, set the IP address, and make the RAC operational using factory defaults.
Provisioning WAN Lines for Nortel Networks 5399 and 8000 Access Switch (300854-C Rev. 00) -- Describes the information you need to provision WAN lines for Remote Access Concentrators. The guide provides several switch types and switch parameters which must be negotiated through the telco before installing the RAC.
Installing and Configuring Nortel Networks Access Switch Software for UNIX (300856-C Rev. 00) -- Describes how to install Remote Access Concentrator software on a UNIX server. This book provides examples of the installation script as well as information about installing a particular security regime.
Installing and Configuring Nortel Networks 5399 and 8000 Access Switch Software for Windows and Windows NT (300857-C Rev. 00) -- Describes the procedures for installing Server Tools and the Network Administrator (na) utility, on a host server running Windows software.
Managing Nortel Networks 5399 and 8000 Access Switches Using Command Line Interfaces (300858-C Rev. 00) -- Describes how to configure and maintain the RAC using UNIX command-line interfaces for both UNIX and Windows environments.
Installing and Administering the Config Utility
(301697-C Rev. 00) -- Describes how to install and configure the Config Utility web-based application software on a UNIX or Windows NT server.
Nortel Networks 5399 and 8000 Access Switch Software Reference
(300860-C Rev. 00) -- Provides reference descriptions of all CLI commands and all na and admin parameters.
