Setting up
WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using a damaged projector could result in a fire and/or an electric shock.
•Don’t place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.
•Do not place the projector in the
•For the projector installed
► Place the projection in a cool place, and pay attention enough to ventilation. The high temperature of the projector could cause a fire, a burn and/or malfunction to the projector.
•Don’t stop up, block and cover the projector's vents.
•Keep a space of 30 cm or more between the sides and other objects such as walls.
•Don’t place the projector on a metallic thing or anything weak in heat.
•Don’t place the projector on a carpet, cushion or bedding.
•Don’t place the projector in direct sunlight or near a hot object such as heater.
•Put nothing about lens and vents of the projector. Put nothing on the projector.
•Put nothing that is sucked or sticks to the bottom of projector. This projector also has intake vents on the bottom of the unit.
► Do not place the projector on a wet surface. Damping the projector or inserting liquid in the projector could cause a fire, an electric shock and/or malfunction to the projector.
•Don’t place the projector in a bathroom or the outdoors.
•Put nothing containing the liquid near the projector.
CAUTION ► Avoid a smoky, humid or dusty place. Placing the projector in such place could cause a fire, an electric shock and/or malfunction to the projector.
•Don’t place the projector near a humidifier, a smoking space or a kitchen.
•Put nothing containing liquid near the projector.
►Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
ViewSonic PJ400 | 10 |