ViewSonic PJ400 manual Projector features, About contents of package

Page 7

Projector features

This projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. It requires just a little space for installation and displays a large image from a short distance.

O High Brightness

Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in bright rooms.

O Low Noise

WHISPER mode is equipped for reducing acoustic noise for quieter operation. It is perfect for use in low luminance rooms where low noise is more important than brightness.

O Compact Body

Even with its many features, this projector is extremely compact and slim, which gives you more flexibility and usability to use it where you want.

About contents of package

Please see the “Contents of package” of the “User’s Manual – Quick Guide”. Your projector should come with the items shown there. Contact your dealer immediately if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution to protect the lens.

------------ for Quick Guide --------------------------------------------

Contents of packages

(1)

Projector with Lens cover

 

 

 

 

(2)

Strap (for Lens cover)

(1)

 

(2)

(3)

Filter cover (for bottom-up use)

 

 

 

 

(4)

Remote control

 

 

 

 

(5)

Two AA batteries (for Remote

 

 

 

 

 

 

 

 

control)

(3)

 

(4)

(5)

(6)

Power cord

 

 

 

 

(7)

RGB cable

 

 

 

 

(8)

User’s manual CD-ROM wizard

(6)

(7)

(8)

(9)Quick Start Guide

-----------------------------------------------------------------------------

ViewSonic PJ400

3

Image 7
Contents PJ400 LCD Projector Compliance Information Important Safety Instructions Copyright Information About this manual PJ400 Model No.VS10459Trademark acknowledgment Contents About contents of package Projector featuresProjector Part namesControls Remote controlMagnify Fastening the lens cover PreparationsPutting batteries Using the remote control About the filter cover for bottom-up use Setting up At 43 screen ArrangementAdjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting power supply Turning on the power Power on/offTurning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Searching an input signalAdjusting the zoom magnifying power Adjusting the focusCorrecting the keystone distortions Using the automatic adjustment featureAt a video signal Adjusting the positionFreezing the screen Using the partial magnify featureTemporarily blanking the screen To choose the target menu Multifunctional settingUsing the menu function To display a menuTo choose the target item To return to the previous menu Setup MenuTo reset To operateMode AspectZoom KeystoneFilter Time ResetWhisper MirrorUsing a test pattern To adjust #1 CUSTOM, #2 Custom or #3 CustomPicture menu High Middle Custom LOW To adjust CustomLOAD1 LOAD2 LOAD3 LOAD4 ProgressiveTV Film Turn OFF MY MemoryOver Scan PhaseImage menu NormalExecute Auto AdjustAt a video signal SizeFormat Auto Ntsc PAL Secam Input menuSpace Auto RGB VideoTurn on Turn OFF Frame LockInformation Normal Hinvert Vinvert H&VINVERT Setup menuVolume Normal WhisperScreen menu Original Turn OFF Start UPNo Input is Detected MessageSync is OUT of Range Auto OFF Option menuSearch RGB S-VIDEO VideoLamp Time Reset  CancelHigh Normal ServiceFAN Speed Auto Adjust Factory Reset Ghost Enable DisableLamp MaintenanceCase of replacement by yourself Air filter ViewSonic PJ400 Inside of the projector Other careRelated messages TroubleshootingInternal portion temperature is rising Regarding the indicator lamps Has become heated It is time to clean the air filter, or there is no airCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedPhenomena that may easily be mistaken for machine defects Color Space setting is not suitable Signal cables are not correctly connectedBrightness is adjusted to an extremely Color settings are not correctly adjusted 25, 28Specifications Warranty and after-serviceSpecifications Unit mm Land/Region Web site = Telephone Mail Customer SupportLimited Warranty ViewSonic Projector