EASY MENU
With the EASY MENU, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.
Item | Description |
|
|
|
ASPECT | Using the buttons ◄/► switches the mode for aspect ratio. | |||
| See the item ASPECT of section IMAGE menu. ( | 19, 30) | ||
ZOOM | Using the buttons ◄/► adjusts the zoom. |
|
|
|
| See the item ASPECT of section SETUP menu. ( | 19, 34) | ||
KEYSTONE | Using the buttons ◄/► corrects the keystone distortion. |
| ||
| See the item KEYSTONE of section SETUP menu. ( | 20,34) | ||
MODE | Using the buttons ◄/► switches the mode of picture type. The | |||
| modes of picture type are combinations of a mode of GAMMA | |||
| ( 27) and a mode of COLOR TEMP ( 28). Choose a suitable | |||
| mode according to the projected source. |
|
|
|
| NORMAL CINEMA DYNAMIC |
|
|
|
| ═══════════════ |
|
|
|
| NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA= #1 |
| ||
| DEFAULT) |
|
|
|
| CINEMA: (COLOR TEMP = LOW) + (GAMMA= #2 DEFAULT) | |||
| DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA= #3 |
|
| |
| DEFAULT) |
|
|
|
| • When the combination of GAMMA and COLOR TEMP differs | |||
| from | |||
| MODE is “CUSTOM”. |
|
|
|
BRIGHT | Using the buttons ◄/► adjusts the brightness. |
|
|
|
| See the item BRIGHT of section PICTURE menu. ( | 27) |
| |
CONTRAST | Using the buttons ◄/► adjusts the contrast. |
|
|
|
| See the item CONTRAST of section PICTURE menu. ( | 27) | ||
COLOR | Using the buttons ◄/► adjusts the strength of whole color. | |||
| See the item COLOR of section PICTURE menu. ( | 28) |
| |
| • This item can be chosen only at a video signal. |
|
|
|
TINT | Using the buttons ◄/► adjusts the tint. |
|
|
|
| See the item TINT of section PICTURE menu. ( | 28) |
|
|
| • This item can be chosen only at a video signal. |
|
|
|
SHARPNESS | Using the buttons ◄/► adjusts the sharpness. |
|
|
|
| See the item SHARPNESS of section PICTURE menu. ( | 28). | ||
ViewSonic PJ400 | 25 |