ViewSonic PJ400 manual Progressive, TV Film Turn OFF, MY Memory, LOAD1 LOAD2 LOAD3 LOAD4

PICTURE menu (continued)

Item	Description
PROGRESSIVE	Using the buttons ▲/▼ switches the progressive mode.
	TV FILM TURN OFF
	═════════
	• This function performs only at an interlaced signal of a
	VIDEO input, a S-VIDEO input or a component video input of
	525i (480i) or 625i (576i) signal.
	• When the TV or FILM is selected, the screen image will be
	crisper. The FILM mode is adaptable to the 2-3 Pull-Down
	system to the conversion. (not adaptable to the 2-2 Pull-Down
	system) But these may cause a certain defect (for example,
	jagged line) of the picture at a quick moving object. In such a
	case, please select the TURN OFF, even though the screen
	image may lose the crisp.
MY MEMORY	Choosing a mode of MY MEMORY using the buttons ▲/▼
	and then pressing the button ► or the ENTER button performs
	each function.
	LOAD1 LOAD2 LOAD3 LOAD4
	SAVE4 ⇔ SAVE3 ⇔ SAVE2 ⇔ SAVE1
	This projector has 4 numbered memories for adjustment data.
	Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads
	the data on the memory whose number corresponds with the
	command’s number, and adjusts the picture automatically
	depending on the data.
	Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the
	current adjustment data on the memory whose number
	corresponds with the command’s number.

ViewSonic PJ400 29