ViewSonic PJ400 manual High Middle Custom LOW, To adjust Custom

Page 32
PICTURE menu (continued)
Item

Description

COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature.

HIGH MIDDLE

 

CUSTOM

LOW

 

To adjust CUSTOM

 

Selecting the CUSTOM and then pressing

 

the button ► or the ENTER button

 

displays a dialog to aid you in adjusting the

 

OFFSET and/or GAIN of CUSTOM mode.

 

OFFSET adjustments change the color

 

intensity on the whole tones of the test

 

pattern.

 

 

GAIN adjustments mainly affect color intensity on the brighter

 

tones of the test pattern.

 

Choose an item using the buttons ◄/►, and adjust the level

 

using the buttons ▲/▼.

 

Using a test pattern

 

You can display a test pattern for checking the effect of your

 

adjustment by pressing the ENTER button. Each time you press

 

the ENTER button, the pattern changes as below.

 

No pattern

Gray scale of 9 steps

 

Ramp Gray scale of 15 steps

COLOR

Using the buttons ▲/▼ adjusts the strength of whole color.

 

Strong ↔ Weak

 

• This item can be chosen only at a video signal.

TINT

Using the buttons ▲/▼ adjusts the tint.

 

Green ↔ Red

 

• This item can be chosen only at a video signal.

SHARPNESS

Using the buttons ▲/▼ adjusts the sharpness.

 

Strong ↔ Weak

ViewSonic PJ400

28

Image 32
Contents PJ400 LCD Projector Compliance Information Important Safety Instructions Copyright Information Trademark acknowledgment PJ400 Model No.VS10459About this manual Contents Projector features About contents of packagePart names ProjectorMagnify Remote controlControls Preparations Fastening the lens coverPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement At 43 screenAdjusting the projectors elevator Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting power supply Power on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom magnifying powerAdjusting the focus Selecting an aspect ratioUsing the automatic adjustment feature At a video signalAdjusting the position Correcting the keystone distortionsTemporarily blanking the screen Using the partial magnify featureFreezing the screen Multifunctional setting Using the menu functionTo display a menu To choose the target menuTo choose the target item Setup Menu To resetTo operate To return to the previous menuAspect ZoomKeystone ModeReset WhisperMirror Filter TimePicture menu To adjust #1 CUSTOM, #2 Custom or #3 CustomUsing a test pattern To adjust Custom High Middle Custom LOWProgressive TV Film Turn OFFMY Memory LOAD1 LOAD2 LOAD3 LOAD4Phase Image menuNormal Over ScanAuto Adjust At a video signalSize ExecuteInput menu Space Auto RGBVideo Format Auto Ntsc PAL SecamInformation Frame LockTurn on Turn OFF Setup menu VolumeNormal Whisper Normal Hinvert Vinvert H&VINVERTScreen menu Start UP Original Turn OFFSync is OUT of Range MessageNo Input is Detected Option menu SearchRGB S-VIDEO Video Auto OFFReset  Cancel Lamp TimeService FAN Speed Auto Adjust Factory Reset GhostEnable Disable High NormalMaintenance LampCase of replacement by yourself Air filter ViewSonic PJ400 Other care Inside of the projectorTroubleshooting Related messagesInternal portion temperature is rising Regarding the indicator lamps It is time to clean the air filter, or there is no air Cooling fan is not operatingThere is a possibility that the interior portion Has become heatedPhenomena that may easily be mistaken for machine defects Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connected Brightness is adjusted to an extremelyColor settings are not correctly adjusted 25, 28 Color Space setting is not suitableWarranty and after-service SpecificationsSpecifications Unit mm Customer Support Land/Region Web site = Telephone MailLimited Warranty ViewSonic Projector