Eiki LC-XB42 owner manual Top Control, RGB Scart Note

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

Top Control INPUT button

Computer 1

Computer 2

Video

REMOTE CONTROL

1		Press the MENU button to display the On-Screen
		Menu. Use the Point ◄►buttons to move the red frame
		pointer to the Input Menu icon.
2		Use the Point ▲▼ buttons to move the red arrow
		pointer to Computer 2 and then press the SELECT
		button.
3		After the Source Select Menu appeared for Computer
		2, move the pointer to Component or RGB(Scart) and
		then press the SELECT button.
			When the input source is coming from video
	Component
			equipment connected to the COMPUTER
			IN 2/COMPONENT IN terminal with a
			Component-VGA Cable, select Component.

Input Menu

Computer

2

COMPUTER button

Computer 1

Computer 2

Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

RGB (Scart)

Note:

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

Source Select Menu

Move the pointer to Component or RGB(Scart)and press the SELECT button.

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.47).

37