Eiki LC-XB42 owner manual Video Input, Noise reduction, Progressive

Video Input

Sharpness

Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off.......... Disabled.

L1........... Lower reduction

L2........... Higher reduction

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off	Disabled.
L1	For an active picture.
L2	For a still picture.
Film	For watching a film. With this function, the
	projector reproduces pictures faithful to the
	original film quality.

	Reset
To reset the adjusted data, select Reset and press the			Image Mode Menu
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.			Move the red frame
			pointer to an image
	Store		item to be set and
			t h e n p r e s s t h e
			SELECT button.
To store the adjusted data, select Store and press the		Store icon
SELECT button. Use the Point ▲▼ buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 39.
	Quit
				A confirmation box
Exit the Image Adjust Menu.				appears and then
				select [Yes].
Notes:

•Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.38).

•Reset and Store icons will be displayed when any adjustment is made.

41