Eiki LC-XB27 owner manual Computer System Selection, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 65 )

One of the following messages may appear when:

Auto	The projector cannot recognize the connected	PC System Menu
	signal conforming to the provided PC Systems.
	The message "Auto" will be displayed on the PC
	System Menu icon and the Auto PC Adjustment
	function will work to display proper images. If
	the image is not projected properly, a manual
	adjustment is required. (p33, 34)

-----There is no signal input from computer. Check the connection between your computer and the projector. (See " Troubleshooting" p60)

Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1~5. (p33, 34)

The Auto PC Adjustment function operates to adjust the projector.

SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button	to display the On-Screen
	Menu. Press the Point 7	8 buttons to move the red
	framed pointer to the PC System Menu icon.
2	Press the Point ed buttons to move the red arrow
	pointer to the system that you want to set, and then

press the SELECT button.

PC System Menu

The PC System Menu icon Selected system is displayed.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p33, 34)

Computer Input

31