Eiki LC-XB27 owner manual Screen Size Adjustment

Computer Input

Store

To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box will appear and then select [Yes].

Stored data can be called up by selecting "Image" in the Image Level Selection on page 35.

Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button.

Quit

Exit the Image Adjust Menu.

Store item

The confirmation box will appear, then select [Yes].

Press the SELECT button at this item to store the adjusted data.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1	Press the MENU button	to display the On-Screen
	Menu. Press the Point 7	8 buttons to move the red
	framed pointer to the Screen Menu icon.
2	Press the Point ed buttons and move the red framed
	pointer to the function that you want to select and

then press the SELECT button.

Normal

Provide the image to fit the screen size.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), this projector enters panning mode automatically. Pan the image with Point ed7 8 buttons. When adjusted, the arrows will turn red. When reached to the correction limit, the arrows will disappear.

Wide

Provide the image to fit wide video aspect ratio (16 : 9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Full screen

Provide the full screen image.

Screen Menu

Screen Menu icon

Move the red framed pointer to the function and press the SELECT button.

✔Note:

•This Screen Menu cannot be operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p31).

•This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

•The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

•True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p31).

Computer Input

37