Eiki LC-XB27 owner manual Setting, Keystone, Blue back, Display

Keystone	Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point 7 8 buttons, and
then press the SELECT button. The keystone dialog box
will appear. Correct keystone with the Point ed buttons.
(p25)
Store .........store the keystone correction even when the
AC power cord is unplugged.
Reset ........reset the keystone correction when the AC
power cord is unplugged.

Blue back

Press the Point 7 8 buttons to switch On/Off. When this function is “On,” a blue image is displayed while the input signal is not detected.

Display

Press the Point 7 8 buttons to switch On/Off. This function decides to display On-Screen Displays.

On	Show all the On-Screen Displays. Use
	this function when you want to project
	images after the lamp becomes bright
	enough. Factory default setting is this
	mode.
Countdown off	Show the input image instead of the
	countdown when turning on the
	projector. Use this function when you
	want to project the image as early as
	possible even when the lamp is not
	bright enough.
Off	Do not show On-Screen Displays.
	except;

●On-Screen Menu

●“Power off?” message

●P-Timer

●“No signal” message for Power management item (p50)

●”Please wait...” message

●White arrows for True item in the Screen Menu (p37)

Setting

Setting

47