Intel 915GME user manual Clocking

Getting Started—Mobile Intel® 915GME Express Chipset

•Two SATA and one IDE (40 pin) Hard Drive interface

•Two PCI 2.3 compliant desktop slots

•82802AC8 Firmware Hub (FWH)

•82562EZ 10/100 Mbps Platform LAN Connect (PLC)

•Two x1 PCI Express slots.

Note: There are actually three x1 PCI Express slots but slot 2 was used for validation purposes. Only slots 0 and 1 are supported.

Clocking

•CK-410M and CK-SSCD

•Battery-backed real time clock

Connector Interface Summary

•One x16 PCI Express Video Interface, doubles as an ADD2-R connector to provide access to dual SDVO ports if PCI Express is unused

•Two SATA ports

•One Ultra ATA (33/66/100/133) IDE connector supporting up to two IDE devices

•Eight Universal Serial Bus (USB) 2.0 ports (Five ports provided on rear-panel, two provided via front-panel header (J6H2), and one at the PCI Express docking connector.)

•Two PCI 2.3 compliant 33 MHz interface connectors

•PS/2-style keyboard and PS/2 mouse (6-pin mini-DIN) connectors

•Standard S-Video connector at back panel interface (not functional)

•LVDS connector on top of circuit board near GMCH

•One VGA connector provides access to integrated graphics

•One LAN connector providing 10/100 connectivity from Intel 82562EZ 10/100 Mbit

PLC

•One 9-pin serial port connector.

•One IrDA port

•Two PCI Express slots (x1)

•Two SODIMM connectors on rear side of circuit board

Debug Features

•Extended Debug Port (XDP) connector

•On-board Port 80h display

Miscellaneous Features

•Configurable for ATX 1.1 Power Supply in desktop mode or AC Mobile Brick/Battery Pack for Mobile Mode

•ATX Form Factor eight layer PCB

•AMI* system BIOS

•Built-in Wake On LAN (WOL) header

•Three built-in fan power connectors: Rear Chassis Fan, CPU Fan, Front Chassis Fan

•Power/Reset buttons

•CMOS clear jumper

	Mobile Intel® 915GME Express Chipset
April 2007	Development Kit User’s Manual
Order Number: 317230-001US	15