Mobile Intel® 915GME Express Chipset
3.Program the H8 via the serial port.
4.Disconnect the power supply from the system.
5.With the board powered off, move the five jumpers listed in Table 11 back to the default stuffing option.
Table 11. | H8 Programming Jumpers |
|
| ||
|
|
|
|
|
|
| # | Jumper | Reference | Default Stuffing Option | Programming Stuffing |
| Designator | Option | |||
|
|
|
| ||
|
|
|
|
|
|
| 3 | 1Hz Clock | J9H1 | Out - normal operation - | IN - clock disabled - enable H8 |
| clock enabled | programming | |||
|
|
|
| ||
|
|
|
|
|
|
| 4 | H8 Programming | J9J3 | OUT - normal operation | IN - enable external H8 |
| programming | ||||
|
|
|
|
| |
|
|
|
|
|
|
| 8 | J7J1 | |||
| Programming | programming | |||
|
|
|
| ||
|
|
|
|
|
|
| 15 | Tx Select | J7A3 | ||
| programming | ||||
|
|
|
|
| |
|
|
|
|
|
|
| 16 | Rx Select | J7A2 | ||
| programming | ||||
|
|
|
|
| |
|
|
|
|
|
|
4.6.2Expansion Slots and Sockets
Table 12. | Expansion Slots and Sockets |
| |
|
|
|
|
| Reference | Slot/Socket Description | Detail |
| Designator | ||
|
|
| |
|
|
|
|
| U2E1 | 478 Pin Grid Array |
|
|
|
|
|
| J5N1 | DDR2 - Channel A - SODIMM slot |
|
|
|
|
|
| J5P1 | DDR2 - Channel B - SODIMM slot |
|
|
|
|
|
| J5F1 | LVDS Graphics Interface |
|
|
|
|
|
| J6C1 | PCI Express (x16) | Table 13 |
|
|
|
|
| J6C1 | Table 14 | |
|
|
|
|
| J7C2 | PCI Express (x1) Slot 1 | Table 15 |
|
|
|
|
| J8C1 | PCI Express (x1) Slot 2 | Table 15 |
|
|
|
|
| J8D1 | PCI Express (x1) Slot 3 | Table 15 |
|
|
|
|
| J8B1 | PCI 2.3 Slot 1 |
|
|
|
|
|
| J9B3 | PCI 2.3 Slot 2 |
|
|
|
|
|
| J7J2 | IDE Interface Connector |
|
|
|
|
|
| J8J3 | Mobile SATA Hard Drive Interface Connector |
|
|
|
|
|
| J7H1 | Desk Top SATA Hard Drive Interface Connector |
|
|
|
|
|
| J6H3 | SATA Desk Top Power Connector |
|
|
|
|
|
| U8G1 | Intel Firmware Hub Socket |
|
|
|
|
|
| BT5H1 | Battery |
|
|
|
|
|
4.6.2.1478 Pin Grid Array (Micro-FCPGA) Socket
The pin locking mechanism on the CPU socket is released by rotating the screw on the socket 180 degrees
Mobile Intel® 915GME Express Chipset |
|
Development Kit User’s Manual | April 2007 |
42 | Order Number: |