Intel 915GME user manual Microfarads

Mobile Intel® 915GME Express Chipset —About This Manual

added to numbers that begin with A through F. (For example, FF is shown as 0FFH.) Decimal and binary numbers are represented by their customary notations. (That is, 255 is a decimal number and 1111 1111 is a binary number. In some cases, the letter B is added for clarity.)

Units of Measure The following abbreviations are used to represent units of measure:

Aamps, amperes

GByte gigabytes KByte kilobytes Kohms kilo-ohms

mA milliamps, milliamperes

MByte megabytes

MHz	megahertz
ms	milliseconds
mW	milliwatts
ns	nanoseconds
pF	picofarads
W	watts
V	volts
µA	microamps, microamperes
µF	microfarads
µs	microseconds
µW	microwatts

Signal Names Signal names are shown in uppercase. When several signals share a common name, an individual signal is represented by the signal name followed by a number, while the group is represented by the signal name followed by a variable (n). For example, the lower chip-select signals are named CS0#, CS1#, CS2#, and so on; they are collectively called CSn#. A pound symbol (#) appended to a signal name identifies an active-low signal. Port pins are represented by the port abbreviation, a period, and the pin number (e.g., P1.0).

Mobile Intel® 915GME Express Chipset
Development Kit User’s Manual	April 2007
8	Order Number: 317230-001US