Intel GA-8VM800PMD-775 user manual Step Save and exit Bios Setup

Step 2:

Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you intent to install Microsoft Windows 2000/XP (Figure 2).

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Hard Disk Boot Priority

English

1.SCSI-0 : ST3120026AS

2.SCSI-1 : ST3120026AS

3.Bootable Add-in Cards

Item Help

Menu Level

Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Figure 2

Step 3:

Set First Boot Device under the Advanced BIOS Features menu to CDROM to boot from CD-ROM after system restarts (Figure 3).

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Advanced BIOS Features

Hard Disk Boot Priority	[Press Enter]
First Boot Device	[CDROM]
Second Boot Device	[Hard Disk]
Third Boot Device	[CDROM]
Password Check	[Setup]
# CPU Hyper-Threading	[Enabled]
Limit CPUID Max. to 3	[Disabled]
No-Execute Memory Protect (Note)	[Enabled]
CPU Enhanced Halt (C1E) (Note)	[Enabled]
CPU Thermal Monitor 2(TM2) (Note)	[Enabled]
CPU EIST Function (Note)	[Enabled]

Item Help

Menu Level

: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Figure 3

Step 4:

Save and exit BIOS Setup.

- 67 - Appendix