Intel GA-8VM800PMD-775 user manual Standard Cmos Features, Time, IDE Channel 0/1 Master, Slave

English

2-1	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Wed, Nov 2 2005			Item Help
	Time (hh:mm:ss)		10:40:9		Menu Level`
					Change the day, month,
` IDE Channel 0 Master			[None]		year
` IDE Channel 0 Slave			[None]
` IDE Channel 1 Master			[None]		<Week>
` IDE Channel 1 Slave			[None]		Sun. to Sat.
` IDE Channel 2 Master			[None]
` IDE Channel 3 Master			[None]		<Month>
	Drive A		[1.44M, 3.5"]		Jan. to Dec.
	Floppy 3 Mode Support		[Disabled]		<Day>
					1 to 31 (or maximum
	Halt On		[All, But Keyboard]		allowed in the month)
	Base Memory		640K		<Year>
	Extended Memory		447M		1999 to 2098
	Total Memory		448M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Defaults	F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week	The week, from Sun to Sat, determined by the BIOS and is display only
	Month	The month, Jan. Through Dec.
	Day	The day, from 1 to 31 (or the maximum allowed in the month)
	Year	The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0/1 Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Device Setup. You can use one of three methods:

Auto	Allows BIOS to automatically detect IDE devices during POST.(default)
None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
Manual	User can manually input the correct settings
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)

IDE Channel 2/3 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive SATA devices setup. You can use one of two methods:

Auto	Allows BIOS to automatically detect SATA IDE devices during POST.
	(Default value)
None	Select this if no SATA IDE devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
Access Mode	Use this to set the access mode for the hard drive. The two options are:
	Large/Auto(default:Auto)
GA-8VM800PMD-775 Motherboard		- 32 -