Sanyo PDG-DHT100L owner manual Menu Bar

qGuide Window

Show the selected Menu of the On-Screen Menu.

wInput Menu

Used to select an input source Computer or Video (pp.32-34).

ePC System Menu

Used to select computer system (p.35).

rPC Adjust Menu

Used to adjust the parameters to match with the input signal format (pp.36-38).

yImage Adjust Menu

Used to adjust the computer image. [Contrast/ Brightness/ Color management/Auto picture control/BrilliantColor/Color temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/Store] (pp.46-48).

uScreen Menu

Used to adjust the size of the image. [Normal/True/Full/ Custom/Digital zoom +/–/Keystone/Ceiling/Rear/Reset/] (pp.40-41).

iSetting Menu

Used to set the projector’s operating configurations (pp.49-61).

tImage Select Menu

Used to select an image level among Standard, Real, Dynamic, and Image 1–10 (p.39).

For Video Source

qGuide Window

Show the selected Menu of the On-Screen Menu.

wInput Menu

Used to select an input source Computer or Video (pp.32-34).

eAV System Menu

Used to select the system of selected video source (p.42).

oInformation Menu

Display the input source information (p.29).

!0Network Menu

See the owner's manual of the Network Board.

r t y u i o

tImage Adjust Menu

Used to adjust the picture image. [Contrast/Brightness/ Color/Tint/Color management/Auto picture control/ BrilliantColor/Color temp./White balance (R/G/B)/ Offset (R/ G/B)/Sharpness/Gamma/Noise reduction/Progressive/Reset/ Store] (pp.46-48).

yScreen Menu

Used to adjust the size of the image. [Normal/Zoom/Natural Wide/Full/Custom/Keystone/Ceiling/Rear/Reset] (pp.44-45).

rImage Select Menu

Used to select an image level among Standard, Cinema, Dynamic, and Image 1–10 (p.43).

uSetting Menu

Used to set the projector’s operating configurations (pp.49-61).

iInformation Menu

Display the input source information (p.29).

oNetwork Menu

See the owner's manual of the Network Board.