Sanyo PDG-DHT100L owner manual Operating with Projector Control

Page 28

Basic Operation

Operating with Projector Control

Zoom Adjustment

Display “Zoom” on the screen. Press the ZOOM button and then press the point ed buttons to zoom in and out the image.

Focus Adjustment

Display “Focus” on the screen. Press the FOCUS button and then press the point ed buttons to adjust the focus of the image.

Lens Shift Adjustment

Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion.

The screen can be moved up or down to 67.7 percent, or sideways up to 41.6 percent from the central axis of the lens shift. Press and hold the LENS SHIFT button for more than 5 seconds to return to the central position. See page 18 for details.

Auto PC Adjustment

Operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 36 for details.

Side Control

SHUTTER button

LIGHT button

ZOOM button

LENS SHIFT

button

FOCUS button

POINT buttons

INFORMATION button

AUTO PC ADJ.. button

Zoom

Focus

Light Function

Light function is used to turn on the lights on the side control and around terminals. To turn off the lights, press the Light button again.

✔Note:

•The buttons on the side control except for the LIGHT button and ON/STAND-BY button do not light up when the projector is in stand-by mode or during the cooling down period.

Shutter Function

Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.60 for detail of setting for the Shutter function.

✔Note:

•The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.60)

•The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.13, 77)

•The projector will shut down automatically when the set time on Shutter management has passed. (p.60)

•The Power management function does not work when the shutter is closed. (p.57)

✔Note:

•The arrow disappears at the maximum lens shift in each direction.

•The arrow turns red when the lens shift comes to the center position of the screen.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model PDG-DHT100L Features and Design Table of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Canadian Radio Interference RegulationsFront!0 Part Names and FunctionsBack Terminals and Connectors Side Control and Indicators Side ControlIndicators Remote Control Remote Control Receivers and Operating Range Remote Control Battery InstallationWired Remote Control Remote Control Code Lens Installation InstallationPositioning Projector Lens Shift Adjustment Picture Level and Pitch AdjustmentWhen the lens is shifted to top When the lens is shifted to bottomReplacement of Terminal Terminals of ProjectorCables used for connection Connecting to ComputerTerminals of the projector Monitor Out Signal Table Connecting to Video EquipmentProjector Attaching the Cable Cover For the U..K Connecting the AC Power CordFor the U..S..A.. and Canada For Continental Europe What is PIN code? Basic OperationTurning On the Projector Enter a PIN codeUnplug the AC power cord from the AC outlet Turning Off the ProjectorHow to Operate the On-Screen Menu Remote ControlSide Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Timer button Shutter buttonFilter button Image ADJ.. buttonRemote Control Operation Input SelectionInput Side Control OperationWhen Selecting the Input 1 with DVI/D-sub 15 terminals Computer Input Source SelectionMenu Operation Input MenuVideo Input Source Selection RGB ScartRGB AV Hdcp Pb/Cb, Pr/CrComputer Input Computer System SelectionAutomatic Multi-Scan System Selecting Computer System ManuallyAuto PC Adjustment To store the adjusted parametersPC Adjust Menu Direct OperationManual PC Adjustment Reset Mode freeTo clear the adjusted data To store the adjusted dataImage Level Selection Standard Real Dynamic Image1 Image SEL.. buttonStandard ImageScreen Size Adjustment Screen MenuKeystone CeilingRear Digital zoom +Video Input Video System SelectionVideo Jack or S-Video Jack Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Zoom Natural WideKeystone Image Adjustment Image Adjust MenuPointer Mode Picture ImageColor M MenuColor Palette DELWhite balance Red/Green/Blue Offset Red/Green/BlueSharpness GammaSetting SettingLamp mode BackgroundLamp control Lamp life controlPicture in Picture Edge blending Color matchingAdvanced color matching DynamicBlackHdmi setup LogoLogo select CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Remote control To change the code for the remote controlTo reset the code for the remote control Filter controlPower management On startSecurity Key lock PIN code lockSecurity Key lock PIN code lockChange the PIN Code Lock setting Change the PIN code lock settingChange the PIN Code Enter a PIN codeProtection ShutterManagement Filter counter Factory defaultTest pattern Maintenance and Care Filter InstructionsService Parts Code 610 334 Reset the filter counter and the scroll counter p.64Replacing the Filter Cartridge Filter counter Scroll counterLamp 1/2 Replace Indicators Lamp Mode ChangeoverLamp Management Lamp Status DisplayIndicators Lamp ReplacementLamp 1 / 2 Replace indicators Replacement Lamp Type No Model No.. of your projectorOptional Color Wheel Installation Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other indicators blink Then check the matters belowTroubleshooting AppendixAppendix Power is turned off Information Image Adjust Menu TreeComputer Input/Video Input NetworkPC Adjust SystemImage Select ScreenSetting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition Lamp Replace 1Fig..4 Compatible Computer Specifications ON-SCREEN ResolutionFreq..kHz Freq..Hz DisplayFreq KHzList of Picture in Picture On-BoardTechnical Specifications Optional Parts POA-MD23ADIConfigurations of Terminals Control Port Connector D-sub 9 pinInput OutputPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Dimensions Functional Execution Command Serial Control InterfaceOperation ExampleStatus Read Command KT5AL-A

PDG-DHT100L specifications

The Sanyo PDG-DHT100L is a versatile projector that caters to a variety of presentation needs, making it an excellent choice for both business and educational settings. Known for its bright and vibrant image quality, this projector utilizes advanced technologies to deliver high-performance visuals.

One of the standout features of the Sanyo PDG-DHT100L is its impressive brightness rating, which typically exceeds 3000 lumens. This high brightness capability ensures that presentations remain clear and visible in various lighting conditions, from dimly lit conference rooms to brightly lit classrooms. Coupled with a high contrast ratio, the projector produces sharp images with deep blacks and bright whites, enhancing the overall viewing experience.

The PDG-DHT100L employs DLP (Digital Light Processing) technology, known for its reliability and excellent color reproduction. DLP projectors produce smooth motion and consistent brightness across the entire image, making them ideal for displaying detailed graphics, videos, and dynamic presentations. The use of a color wheel contributes to optimal color accuracy, resulting in vivid and true-to-life colors.

Connectivity is another area where the Sanyo PDG-DHT100L shines. It offers multiple input options, including HDMI, VGA, and composite inputs, allowing users to connect a range of devices such as laptops, tablets, and media players seamlessly. This flexibility makes it easy to integrate the projector into existing setups or to utilize it for various types of presentations without the need for additional adapters.

Portability is a key characteristic of the Sanyo PDG-DHT100L. Weighing relatively light compared to other projectors in its class, it is designed for easy transport between different locations. This feature is especially beneficial for professionals who need to deliver presentations at multiple sites or educators moving from classroom to classroom.

Additionally, the Sanyo PDG-DHT100L encompasses a robust lamp life, often exceeding 4000 hours in standard mode, which reduces maintenance costs and downtime. The easy-to-replace lamp is designed for convenience, ensuring that users can quickly resume presentations after a lamp change.

In summary, the Sanyo PDG-DHT100L combines brightness, color accuracy, and portability, making it a reliable choice for anyone in need of a high-quality projector. Its advanced DLP technology, multiple connectivity options, and impressive lamp life further establish it as a valuable asset for both professional and educational purposes.
Top Page Image Contents