Sanyo PDG-DHT100L owner manual Air Circulation, Top Panel

Page 6

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.

–Keep the exhaust vent at least 3’ (1 m) away from any objects.

–Do not touch peripheral parts of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.

–Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

–Do not cover vents with papers or other materials.

–Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking cooling air through bottom vent.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

IMPORTANT!

Filter Maintenance!!

The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.

In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.

If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 2) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below). Stop using the projector immediately and replace the filter cartridge.

Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on page 61 and “Maintenance and Care” on pages 62–64.

Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector..

Top Panel

Fig..1 Filter replacement icon

AIR INTAKE VENT

EXHAUST VENT

Fig.2 Filter cartridge replacement

 

icon

WARNING FILTER indicator

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model PDG-DHT100L Features and Design Table of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Canadian Radio Interference RegulationsPart Names and Functions Front!0Back Terminals and Connectors Side Control and Indicators Side ControlIndicators Remote Control Remote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Code Installation Lens InstallationPositioning Projector When the lens is shifted to top Lens Shift AdjustmentPicture Level and Pitch Adjustment When the lens is shifted to bottomReplacement of Terminal Terminals of ProjectorConnecting to Computer Cables used for connectionTerminals of the projector Connecting to Video Equipment Monitor Out Signal TableProjector Attaching the Cable Cover Connecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe Turning On the Projector What is PIN code?Basic Operation Enter a PIN codeUnplug the AC power cord from the AC outlet Turning Off the ProjectorSide Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Filter button Timer buttonShutter button Image ADJ.. buttonInput Remote Control OperationInput Selection Side Control OperationMenu Operation When Selecting the Input 1 with DVI/D-sub 15 terminalsComputer Input Source Selection Input MenuRGB AV Hdcp Video Input Source SelectionRGB Scart Pb/Cb, Pr/CrAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyPC Adjust Menu Auto PC AdjustmentTo store the adjusted parameters Direct OperationManual PC Adjustment To clear the adjusted data ResetMode free To store the adjusted dataStandard Image Level SelectionStandard Real Dynamic Image1 Image SEL.. button ImageScreen Size Adjustment Screen MenuRear KeystoneCeiling Digital zoom +Video Jack or S-Video Jack Video InputVideo System Selection Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Zoom Natural WideKeystone Pointer Mode Image AdjustmentImage Adjust Menu Picture ImageColor Palette Color MMenu DELSharpness White balance Red/Green/BlueOffset Red/Green/Blue GammaSetting SettingLamp control Lamp modeBackground Lamp life controlPicture in Picture Edge blending Color matchingAdvanced color matching DynamicBlackLogo select Hdmi setupLogo CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code To reset the code for the remote control Remote controlTo change the code for the remote control Filter controlPower management On startSecurity Security Key lockPIN code lock Key lock PIN code lockChange the PIN Code Change the PIN Code Lock settingChange the PIN code lock setting Enter a PIN codeShutter ProtectionManagement Factory default Filter counterTest pattern Maintenance and Care Filter InstructionsReset the filter counter and the scroll counter p.64 Service Parts Code 610 334Replacing the Filter Cartridge Filter counter Scroll counterLamp Management Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayLamp Replacement IndicatorsLamp 1 / 2 Replace indicators Replacement Lamp Type No Model No.. of your projectorOptional Color Wheel Installation Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other indicators blink Then check the matters belowTroubleshooting AppendixAppendix Power is turned off Computer Input/Video Input Information Image AdjustMenu Tree NetworkImage Select PC AdjustSystem ScreenSetting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition Lamp Replace 1Fig..4 Freq..kHz Freq..Hz Compatible Computer SpecificationsON-SCREEN Resolution DisplayFreq KHzList of Picture in Picture On-BoardTechnical Specifications Optional Parts POA-MD23ADIInput Configurations of TerminalsControl Port Connector D-sub 9 pin OutputPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Operation Functional Execution CommandSerial Control Interface ExampleStatus Read Command KT5AL-A

PDG-DHT100L specifications

The Sanyo PDG-DHT100L is a versatile projector that caters to a variety of presentation needs, making it an excellent choice for both business and educational settings. Known for its bright and vibrant image quality, this projector utilizes advanced technologies to deliver high-performance visuals.

One of the standout features of the Sanyo PDG-DHT100L is its impressive brightness rating, which typically exceeds 3000 lumens. This high brightness capability ensures that presentations remain clear and visible in various lighting conditions, from dimly lit conference rooms to brightly lit classrooms. Coupled with a high contrast ratio, the projector produces sharp images with deep blacks and bright whites, enhancing the overall viewing experience.

The PDG-DHT100L employs DLP (Digital Light Processing) technology, known for its reliability and excellent color reproduction. DLP projectors produce smooth motion and consistent brightness across the entire image, making them ideal for displaying detailed graphics, videos, and dynamic presentations. The use of a color wheel contributes to optimal color accuracy, resulting in vivid and true-to-life colors.

Connectivity is another area where the Sanyo PDG-DHT100L shines. It offers multiple input options, including HDMI, VGA, and composite inputs, allowing users to connect a range of devices such as laptops, tablets, and media players seamlessly. This flexibility makes it easy to integrate the projector into existing setups or to utilize it for various types of presentations without the need for additional adapters.

Portability is a key characteristic of the Sanyo PDG-DHT100L. Weighing relatively light compared to other projectors in its class, it is designed for easy transport between different locations. This feature is especially beneficial for professionals who need to deliver presentations at multiple sites or educators moving from classroom to classroom.

Additionally, the Sanyo PDG-DHT100L encompasses a robust lamp life, often exceeding 4000 hours in standard mode, which reduces maintenance costs and downtime. The easy-to-replace lamp is designed for convenience, ensuring that users can quickly resume presentations after a lamp change.

In summary, the Sanyo PDG-DHT100L combines brightness, color accuracy, and portability, making it a reliable choice for anyone in need of a high-quality projector. Its advanced DLP technology, multiple connectivity options, and impressive lamp life further establish it as a valuable asset for both professional and educational purposes.
Top Page Image Contents