Sanyo PDG-DHT100L Picture Image, Image Adjustment, List, Image Adjust Menu, Pointer Mode

Page 46

Picture Image

Image Adjustment

1

Press the MENU button to display the On-Screen Menu.

Use the Point 7 8 buttons to move the red frame pointer

 

to the Image Adjust Menu icon.

2

Use the Point ed buttons to move the red frame pointer

to the desired item and then press the SELECT button

to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease contrast; press the Point

8button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color ]

Press the Point 7 button to decrease the intensity of the color;

press the Point 8 button to increase the intensity of the color (from 0 to 63).

Tint ]

Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1

Use the Point ed buttons to move the red frame pointer

to Color Management, and then press the SELECT

 

button. The projected image freezes, and the COLOR

 

MANAGEMENT POINTER appears.

2

Use the Point ed7 8 buttons to move the pointer to the

spot where you want to adjust the color and then press

 

the SELECT button. The COLOR SELECTION window

 

appears, and the color in the center of the pointer is

 

selected and you can adjust the color.

3

Use the Point ed7 8 buttons to adjust the LEVEL and

PHASE of the color, and then press the SELECT button

to confirm the setting. Then use the Point ed buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

LIST

Go to the COLOR MANAGEMENT LIST.

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press SELECT button.

Use the Point 7 8 buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT

POINTER

Note:

]Displayed in grayout in the computer Input. •Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.42).

•Color management is displayed in grayout when there is no signal.

46

Image 46
Contents Model PDG-DHT100L Features and Design Table of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Air Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Canadian Radio Interference RegulationsFront!0 Part Names and FunctionsBack Terminals and Connectors Side Control and Indicators Side ControlIndicators Remote Control Remote Control Receivers and Operating Range Remote Control Battery InstallationWired Remote Control Remote Control Code Lens Installation InstallationPositioning Projector When the lens is shifted to top Lens Shift AdjustmentPicture Level and Pitch Adjustment When the lens is shifted to bottomReplacement of Terminal Terminals of ProjectorCables used for connection Connecting to ComputerTerminals of the projector Monitor Out Signal Table Connecting to Video EquipmentProjector Attaching the Cable Cover For the U..K Connecting the AC Power CordFor the U..S..A.. and Canada For Continental Europe Turning On the Projector What is PIN code?Basic Operation Enter a PIN codeUnplug the AC power cord from the AC outlet Turning Off the ProjectorSide Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Filter button Timer buttonShutter button Image ADJ.. buttonInput Remote Control OperationInput Selection Side Control OperationMenu Operation When Selecting the Input 1 with DVI/D-sub 15 terminalsComputer Input Source Selection Input MenuRGB AV Hdcp Video Input Source SelectionRGB Scart Pb/Cb, Pr/CrAutomatic Multi-Scan System Computer InputComputer System Selection Selecting Computer System ManuallyPC Adjust Menu Auto PC AdjustmentTo store the adjusted parameters Direct OperationManual PC Adjustment To clear the adjusted data ResetMode free To store the adjusted dataStandard Image Level SelectionStandard Real Dynamic Image1 Image SEL.. button ImageScreen Size Adjustment Screen MenuRear KeystoneCeiling Digital zoom +Video Jack or S-Video Jack Video InputVideo System Selection Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Zoom Natural WideKeystone Pointer Mode Image AdjustmentImage Adjust Menu Picture ImageColor Palette Color MMenu DELSharpness White balance Red/Green/BlueOffset Red/Green/Blue GammaSetting SettingLamp control Lamp modeBackground Lamp life controlPicture in Picture Edge blending Color matchingAdvanced color matching DynamicBlackLogo select Hdmi setupLogo CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code To reset the code for the remote control Remote controlTo change the code for the remote control Filter controlPower management On startSecurity Security Key lockPIN code lock Key lock PIN code lockChange the PIN Code Change the PIN Code Lock settingChange the PIN code lock setting Enter a PIN codeProtection ShutterManagement Filter counter Factory defaultTest pattern Maintenance and Care Filter InstructionsService Parts Code 610 334 Reset the filter counter and the scroll counter p.64Replacing the Filter Cartridge Filter counter Scroll counterLamp Management Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayIndicators Lamp ReplacementLamp 1 / 2 Replace indicators Replacement Lamp Type No Model No.. of your projectorOptional Color Wheel Installation Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other indicators blink Then check the matters belowTroubleshooting AppendixAppendix Power is turned off Computer Input/Video Input Information Image AdjustMenu Tree NetworkImage Select PC AdjustSystem ScreenSetting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition Lamp Replace 1Fig..4 Freq..kHz Freq..Hz Compatible Computer SpecificationsON-SCREEN Resolution DisplayFreq KHzList of Picture in Picture On-BoardTechnical Specifications Optional Parts POA-MD23ADIInput Configurations of TerminalsControl Port Connector D-sub 9 pin OutputPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Dimensions Operation Functional Execution CommandSerial Control Interface ExampleStatus Read Command KT5AL-A

PDG-DHT100L specifications

The Sanyo PDG-DHT100L is a versatile projector that caters to a variety of presentation needs, making it an excellent choice for both business and educational settings. Known for its bright and vibrant image quality, this projector utilizes advanced technologies to deliver high-performance visuals.

One of the standout features of the Sanyo PDG-DHT100L is its impressive brightness rating, which typically exceeds 3000 lumens. This high brightness capability ensures that presentations remain clear and visible in various lighting conditions, from dimly lit conference rooms to brightly lit classrooms. Coupled with a high contrast ratio, the projector produces sharp images with deep blacks and bright whites, enhancing the overall viewing experience.

The PDG-DHT100L employs DLP (Digital Light Processing) technology, known for its reliability and excellent color reproduction. DLP projectors produce smooth motion and consistent brightness across the entire image, making them ideal for displaying detailed graphics, videos, and dynamic presentations. The use of a color wheel contributes to optimal color accuracy, resulting in vivid and true-to-life colors.

Connectivity is another area where the Sanyo PDG-DHT100L shines. It offers multiple input options, including HDMI, VGA, and composite inputs, allowing users to connect a range of devices such as laptops, tablets, and media players seamlessly. This flexibility makes it easy to integrate the projector into existing setups or to utilize it for various types of presentations without the need for additional adapters.

Portability is a key characteristic of the Sanyo PDG-DHT100L. Weighing relatively light compared to other projectors in its class, it is designed for easy transport between different locations. This feature is especially beneficial for professionals who need to deliver presentations at multiple sites or educators moving from classroom to classroom.

Additionally, the Sanyo PDG-DHT100L encompasses a robust lamp life, often exceeding 4000 hours in standard mode, which reduces maintenance costs and downtime. The easy-to-replace lamp is designed for convenience, ensuring that users can quickly resume presentations after a lamp change.

In summary, the Sanyo PDG-DHT100L combines brightness, color accuracy, and portability, making it a reliable choice for anyone in need of a high-quality projector. Its advanced DLP technology, multiple connectivity options, and impressive lamp life further establish it as a valuable asset for both professional and educational purposes.