Hitachi 8880R manual Starting the Setup Menu, Entering Setup Menu

Ch 2: System Environment Setting

Starting the Setup Menu

The Setup Menu, stored in the ROM of the system equipment, must be started in the following way:

1.Power the system equipment.

2.While “Press <F2> to enter SETUP” is being displayed, press the The Setup Menu starts and the Main menu is displayed.

F2

key.

			PhoenixBIOS Setup Utirity
	Main	Advanced	Security Boot	Exit
	System Time :			[HH:MM:SS]					Item Specific Help
	System Date :			[MM/DD/YYYY]
	Legacy Diskette A :			[1.44/1.25MB 31/2"]
	Legacy Diskette B :			[Disabled]
	Primary Master :			[None]
	Primary Slave :			[None]
	Network Server			[Disabled]
	System Information
	System Memory			xxxKB
	Extended Memory			xxxMB
	F1	Help −↓	Select Item	-/+	Change Values				F9 Setup Defaults
	ESC Exit ←→ Select Menu			Enter	Select		Sub-Menu		F10 Save and Exit
		Figure 18 Entering Setup Menu
If the operating system has already started before the								key is pressed, terminate the OS and then restart the
						F2

system equipment. Some type of OS, such as Windows NT, requires special operation such as shutdown. Check the manual of your OS.

Hitachi VisionBase 8880R Server 23