Hitachi 8880R manual Front Panel, P/S Receptacle and On/Off Switch

Page 9

Figure 3 P/S Receptacle and On/Off Switch

Ch 1: Hardware

3.Starting with Power Supply #1 (far right), connect the proper end of each AC power cord into the AC power receptacle and then to an outside power source. On each power supply press the On/Off Power Supply Switch to the On position as shown in Figure 3 P/S Receptacle and On/Off Switch.

P/S 1

P/S 2

P/S 3

P/S 4

On/Off Power

AC Input Switch (TYP)

Receptacle (TYP)

Figure 3 P/S Receptacle and On/Off Switch

4.Confirm that the Main Power LED is now illuminated.

5.Close the Power Supply cover and secure it using the original 2 screws. Close the HDD bay door and secure it using the key.

6.Turn on the power to the system by pressing the Power Switch located on the front panel.

7.You may now boot the system by pressing the Main Power Switch on the front panel.

Front Panel

The following table and figure will explain the locations and functions of the front panel controls and indicators. See Figure 4 Front Panel Detail of the front panel for location of the features listed in the following table.

	Item	Feature	Description

	3.5-inch Diskette Drive

	A	Activity LED	When lit, it indicates the drive is in use.

	B	Ejector button	When pressed, it ejects the diskette.

	Front Panel LEDs and Indictors

	C	Front panel LCD	It displays information about the system and can also be controlled using the Menu
			Switch (I).

	D	Main Power Switch	Press this switch to turn on the power inside the system or to boot the system.

	E	LCD Contrast/Slider	Max brightness only

	F	CPU Operation	This indicator is related to activity in each CPU. When it is flashing it is showing CPU
			activity. (1 LED per CPU)

	G	Security Lock	In the locked position (when the lock is turned to the left or counter clock-wise) it will
			prevent the system Power Switch, keyboard, and mouse from being operational.

	H	Main Power LED	When illuminated this LED indicates that all of the system’s AC power connections
			are correct, the power supplies are turned on, and the system is receiving direct
			current (DC). The system is ready to be activated by the Main Power Switch.

Hitachi VisionBase 8880R Server

5

Image 9

Contents Product Guide Hitachi VisionBase 8880R ServerTrademarks CopyrightDisclaimer Issue Date November Part Number 202-85031-01-Rev AContents 3 Error Information POST Error System Beeps System Specifications 1 HardwareSystem Overview 6 SCA2 Disk Bay SAF-TE Hot-swappable disk bay compliant SCSI Hitachi VisionBase 8880R Server Powering-On the System Figure 1 Accessing the Power SuppliesFigure 2 Accessing the Power Supplies Front Panel Figure 3 P/S Receptacle and On/Off SwitchFigure 4 Front Panel Detail Back Panel Figure 6 Direct Boot Switch DetailFigure 5 Back Panel Detail Detail ASafety Guidelines Removing the Server Panels and Accessing Its ComponentsWarnings and Cautions Tools and Supplies You NeedFigure 7 Accessing the Option Slots Accessing the PCI SlotsFigure 8 Option Slots PCI/ISA Option BoardsHard Disk Drives Figure 9 Accessing the Hard Disk DrivesSCSI SCA Hard Disk Drives Figure 10 Hard Disk Drive BaysFigure 11 Removing/Installing a HDD Installing/Swapping a HDDOptional Devices Figure 12 Mounting the HDD CarrierHDD HDD Position Pins HDD Carrier 4 Mounting Screws Figure 13 Memory and CPU Slots Figure 14 CPU/VRM Installation DetailMemory The system supports the following specifications for memory DIMMs Figure 15 Memory Board Slot LocationFigure 16 System Board Default Jumper Settings Jumper SettingsVRM #3 VRM #4Figure 17 I/O Board Switch Settings 2 System Environment Setting Flow of System Environment SettingBefore Operations Outline of the Setup Menu What You Can Do with the System Environment SettingSetting for Each Board Outline of ISA Configuration Utility ICUNotes on Use PCI BoardFlow of the Setup Menu Operation Setup MenuFigure 18 Entering Setup Menu Starting the Setup MenuSetup Menu Screen Configuration of the Setup Menu ScreenFigure 19 Setup Menu Screen Configuration In the Setup Menu, the following key operations are allowed Operating the Keys on the Setup MenuSteps for Setting the Setup Menu What You Can Do on the Main MenuFigure 20 Main Menu Screen System Time and System Date Legacy Diskette A,BPrimary Master Slave Execute ROM Diagnostic Unsupported Reset Configuration DataWhat You Can Do on the Advanced Menu Network serverI/O Device Configuration PCI ConfigurationSelect Resources Current ResourcesFloppy disk controller Parallel portLocal Bus IDE adapter PS/2 MouseEnable memory gap Ext MP Configuration TableConsole Redirection Unsupported I/O APIC ModeLarge Disk Access Mode Unsupported WinNT 4.0 Install ModeSpeaker Volume Caching Above 4GBUser Password is Supervisor Password isSet Supervisor Password Set User PasswordWhat You Can Do on the Boot menu Figure 23 Boot Menu ScreenHard Drive IDE Hard Disk Drive Exit Saving Changes What You Can Do on the Exit MenuExit Discarding Changes Figure 24 Exit Menu ScreenNotes on the Setup Menu ISA Configuration Utility ICULoad Setup Defaults Discard ChangesFlow of Operation with the ICU Backup for ICU DiskStarting the ICU System ResourcesSpace Do not remove ICU DISK2 before the ICU terminatesICU Screen How to Use HelpOperating the ICU Figure 25 ICU ScreenExiting the ICU Checking Resources Used by the System Checking Resource StatusChecking Resources for Extended Boards Adding an Extended Board6. A dialog box for confirmation is displayed. Choose OK Changing the Settings in Extended Boards Settings for Each ResourceReserving I/O Port Addresses Removing an Extended Board When ICU Program Disk Has Been Destroyed Reserving Resources In Use from an ISA BoardNOTE Unknown Card is displayed for RAID controller PC-CA7112 Lock/Unlock Card Restoring Configuration InformationErrors and Countermeasures Restrictions on the ICU Returning the Settings of the Setup Information to Defaults Returning the Settings to DefaultsReturning the ICU Settings to Defaults List of Utility SettingsCh 2 System Environment Setting Fixed ConfigurationThis table defines the SCSI Select factory default settings Symbios Logic SCSI Configuration UtilitiesPOST Error 3 Error InformationCh 3 Error Information Hitachi VisionBase 8880RSystem Beeps 2. Select Advanced Menu-Windows NT 4.0 Install Mode Installing Windows NT4 NT Drivers and Limitations Windows NT Driver RecommendationsHitachi VisionBase 8880R 5 Related Document and Specification Environment SpecificationRelated Document Hitachi VisionBase 8880R Ch 5 Related Document and Specification