Hitachi CP-S830W/E specifications Outline, Features, Operating Guide, Contents

Page 1

Liquid Crystal Projector

Model name

CP-S830W/E

OPERATING GUIDE

Thank you very much for purchasing this Hitachi Liquid Crystal Projector.

Please read this operating guide to use correctly. After reading this manual, keep it carefully for

future reference.

ENGLISH

Outline

This Liquid Crystal Projector can display various

computer signals and NTSC/PAL/SECAM video

signals.

Features

(1) High brightness

A highly efficient optical system with a UHB lamp ensures

high brightness.

(2) High resolution

Three separate high-definition liquid crystal panels are

used for the R, G and B signals.

(3)Compact size, light weight for portability

(4)RGB output terminal

(5)RS232C Communication

(6)Mouse emulation

(7)Complies with VESA DDC1/2B specifications

Contents	Page
Before use		3
Names and functions of each
part		7
Installation		11
Basic operations		12
Adjustments and functions ..		14
Connection to the video signal
terminals		18
Connection to the RGB signal
terminal		18
Connection to the control
signal terminal		21
Example of system setup ....		26
Cleaning the air filter		27
Lamp		28
Message table		29
When you think something
wrong		30
Specifications		31

Image 1

Contents Contents FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Instructions to UsersDo not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occursCleaning Be careful in handling the power cordHandle the power cord carefully Do not step on this unit or do not put a Heavy object on itClean inside the unit at least once two years When you are not going to use For a long timeDo not place this unit where it gets hot VolumeMain unit Names and functions of each partRemote control sensor RGB input terminal AC in socket Main Power switchRGB output terminal Video input terminalRemote control transmitter Replace the cover How to insert batteriesExample of the projector and screen installation InstallationHow to use foot adjusters View from the topTo project the picture Basic operationsPLUG&PLAY To turn off the powerTo return to the initial setting Adjustments and functionsMemory function Adjustment Item Details of adjustment SET UPImage InputMenu OPT. allows you to control communication function etc OPTConnection to the RGB signal terminal Connection to the video signal terminalsResolution Standard Display Dots Example of computer signalKHz Type Computer/signal Horizontal Timing µs Initial set signalsControl signal terminal Connection to the control signal terminalADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command errorConnecting various equipment Example of system setupClean the air filter using a vacuum cleaner Cleaning the air filterRemove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw Lamp Reset the lamp timeMessage table On-screen displayWhen you think something wrong Specifications