Hitachi CP-S830W/E Adjustments and functions, Memory function, To return to the initial setting

Page 14

Adjustments and functions

RESET

MENU

2, 3

RIGHT RESET

MUTE INPUT

ON

LAMP TEMP

STANDBY/ON

1

1, 2, 3

STANDBY/ON

	MENU

TIMER	VOL
TIMER

BLANK

POSITION MUTE

1 Press the MENU (

) buttons or the MENU ON /

OFF button.

∙On-screen menus are displayed on the screen.

2 Select the menu to be adjusted using the MENU (	)
buttons or MENU STICK SWITCH.

∙Menu displayed in green is selected.

3 Select the item to be adjusted using the MENU (	)
buttons or MENU STICK SWITCH.

∙Item displayed in green can be adjusted.

When no operation is done for about 5 ~ 10 seconds, menu screen will go off.

Memory function

Individual memory functions are provided for the VIDEO1, VIDEO2, RGB1 and RGB2 input terminals. Adjustments are saved after power off.

To return to the initial setting

∙Resetting menu items (SETUP, INPUT, IMAGE, OPT.)

(1)Select the menu item to return to the initial setting.

(2)Press the RESET button.

(3)Select the DEFAULT (To select the CANCEL is not changed). (Display shown on the right will appear.)

∙Resetting adjustment items (VOLUME, BRIGHT etc.)

(1)Select the adjustment item to return to the initial setting.

(2)Press the RESET button.

SETUP INPUT IMAGE OPT.

	VOLUME
	BRIGHT RESET		'SETUP'
	CONTRAST	DEFAULT
	SHARPNESS	DEFAULT
	SHARPNESS	CANCEL
	COLOR
	TINT
	COLOR BAL	R	B

14

Image 14

Contents Outline FeaturesContents Operating GuideFor the Customers in U.K Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursHandle the power cord carefully Be careful in handling the power cordCleaning Do not step on this unit or do not put a Heavy object on itDo not place this unit where it gets hot When you are not going to use For a long timeClean inside the unit at least once two years VolumeNames and functions of each part Main unitRGB output terminal AC in socket Main Power switchRemote control sensor RGB input terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverHow to use foot adjusters InstallationExample of the projector and screen installation View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYMemory function Adjustments and functionsTo return to the initial setting SET UP Adjustment Item Details of adjustmentInput ImageOPT Menu OPT. allows you to control communication function etcConnection to the video signal terminals Connection to the RGB signal terminalKHz Type Example of computer signalResolution Standard Display Dots Initial set signals Computer/signal Horizontal Timing µsConnection to the control signal terminal Control signal terminalSerial mouse PS/2 mouseADB Mac mouse Communication Control command tableControl command table Control data table Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorExample of system setup Connecting various equipmentCleaning the air filter Clean the air filter using a vacuum cleanerLoosen two screws and pull Handle to remove Lamp.Screw How to replace lampRemove the lamp cover Message table Reset the lamp timeLamp On-screen displayWhen you think something wrong Specifications