Hitachi CP-S830W/E specifications Names and functions of each part, Main unit

Page 7

Names and functions of each part

Main unit

		MENU button
		Picture adjustments.
		Refer to page 14~17 for details.
	RESET button	INPUT button
	Resets unit to factory settings.	INPUT button
	Resets unit to factory settings.	To select the input source.
	(See page 14)	To select the input source.
	(See page 14)	RESET
		Each time this button is pressed, the input
		source is changed in sequence as shown
		below.

ENGLISH

MUTE button

Silences the sound. (Cancels the mute when the unit is set in mute mode.)

LAMP indicator

This lights or blinks when the lamp does not light. (See page 30)

MENU

MUTE INPUT

ON

LAMP TEMP

RGB1 RGB2 VIDEO1 VIDEO2

TEMP indicator

This lights or blinks when temperature inside the projector is too high or when fan is abnormal.(See page 30)

STANDBY / ON button

Power ON/OFF button.

OFF sets the unit in standby mode. (see page 12~13)

ZOOM knob

Adjusts picture size. (See page 12)

Remote control sensor

Lens

Lens cap

STANDBY/ON

Speaker

ON indicator

This blinks in the standby mode and lights in the operation mode.(See page 30)

Speaker

Cooling fan

(exhaust)

Handle

FOCUS ring

∙Use the remote control transmitter within the range of about 16 feet from the remote control sensor and within 30° to both the left and right.

Adjusts focus. (See page 12)

7

Image 7

Contents Operating Guide FeaturesContents OutlineFor the Customers in U.K Instructions to Users Video signal cablesPower cord Before useIf any abnormality occurs Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place Do not use power supplies other Than that specifiedDo not step on this unit or do not put a Heavy object on it Be careful in handling the power cordCleaning Handle the power cord carefullyVolume When you are not going to use For a long timeClean inside the unit at least once two years Do not place this unit where it gets hotMain unit Names and functions of each partVideo input terminal AC in socket Main Power switchRemote control sensor RGB input terminal RGB output terminalRemote control transmitter Replace the cover How to insert batteriesView from the top InstallationExample of the projector and screen installation How to use foot adjustersTo project the picture Basic operationsPLUG&PLAY To turn off the powerTo return to the initial setting Adjustments and functionsMemory function Adjustment Item Details of adjustment SET UPImage InputMenu OPT. allows you to control communication function etc OPTConnection to the RGB signal terminal Connection to the video signal terminalsResolution Standard Display Dots Example of computer signalKHz Type Computer/signal Horizontal Timing µs Initial set signalsControl signal terminal Connection to the control signal terminalADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Example of command error Procedure of getting the Projector statusProcedure of setting the Projector status Procedure of default setting the Projector statusConnecting various equipment Example of system setupClean the air filter using a vacuum cleaner Cleaning the air filterRemove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw On-screen display Reset the lamp timeLamp Message tableWhen you think something wrong Specifications