Hitachi CP-S830W/E If any abnormality occurs, Do not look directly at the lens when Lamp is lit

Page 4
outlet.
power
from the
Pull out the power plug
outlet.
power
from the
power plug
Pull out the

(Safety precaution)

Warning

If any abnormality occurs.

When there is an abnormal smell or smoke, if you use this unit as it is, this could cause a fire or electric shock, etc. When an abnormality is found, immediately turn off the power switch and pull out the power plug from the power outlet. Check that there is no smoke, etc., then contact your dealer to repair the unit. Do not repair it yourself as it is very dangerous.

Do not use this unit as it

is after trouble has occurred, such as "No

picture", "No sound", "Abnormal sound", etc. This may cause a fire, electric shock, etc. In this case immediately turn off the power

switch and disconnect the power plug, then contact your dealer to repair the unit.

Do not look directly at the lens when

the lamp is lit.

Do not look directly at the lens when the lamp is lit. Since a strong light

is used, it could damage you vision, etc. Especially pay attention if children are present.

Do not insert any foreign object.

Do not insert a metal or flammable

object inside through the ventilation holes, etc. This may cause a fire,

electric shock, etc.

If foreign matter enters inside, turn the power switch off and disconnect

the power plug from the power outlet and contact your dealer. If you use as it is, it may cause a fire, electric shock, etc. Be careful especially if children could touch the unit.

If water, etc. enters inside the unit, turn off the power switch of the unit first and disconnect the power plug and then contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

Do not install this unit in an unstable place.

Avoid placing it in an unstable place

Do not apply any shock.

If you drop this unit or if the cabinet is broken, turn off the power switch, disconnect the power plug and contact your dealer. If you use it as it is, it may cause a fire, electric shock, etc.

Pull out the power plug from the power outlet.

such as weak base, inclined floor, etc. This may cause it to drop or fall over, resulting in injury.

Do not open the cabinet.

Do not open the cabinet. There are high voltage parts inside the cabinet

and this may cause an

Electric shock

Prohibition

electric shock. Ask your

hazard

of

disassembly

dealer to check inside and adjust and repair the unit.

Do not remodel this unit.

 

Do not remodel this unit. It may

 

 

 

 

 

 

 

cause a fire, electric shock, etc.

Prohibition

 

 

of

 

 

disassembly

 

Do not put a container, etc. with

 

 

 

 

 

 

 

 

 

 

 

liquid on this unit.

Do not put a vase, flowerpot, cosmetic container, medicine or

water and small metal objects on this unit. If liquid spills and enter inside the unit, it may cause a fire, electric shock, etc.

Do not use this in a bathroom, etc.

Do not use this unit in a bathroom,

etc. This may cause a fire, electric

shock, etc.

Do not use near water

4

Do not use power supplies other

than that specified.

Do not use this unit with a power voltage other than specified power

supply voltage. It may cause a fire, electric shock, etc.

Image 4
Contents Features ContentsOutline Operating GuideFor the Customers in U.K Video signal cables Power cordBefore use Instructions to UsersDo not look directly at the lens when Lamp is lit Do not install this unit in an unstable placeDo not use power supplies other Than that specified If any abnormality occursBe careful in handling the power cord CleaningHandle the power cord carefully Do not step on this unit or do not put a Heavy object on itWhen you are not going to use For a long time Clean inside the unit at least once two yearsDo not place this unit where it gets hot VolumeNames and functions of each part Main unitAC in socket Main Power switch Remote control sensor RGB input terminalRGB output terminal Video input terminalRemote control transmitter How to insert batteries Replace the coverInstallation Example of the projector and screen installationHow to use foot adjusters View from the topBasic operations To project the pictureTo turn off the power PLUG&PLAYTo return to the initial setting Adjustments and functionsMemory function SET UP Adjustment Item Details of adjustmentInput ImageOPT Menu OPT. allows you to control communication function etcConnection to the video signal terminals Connection to the RGB signal terminalResolution Standard Display Dots Example of computer signalKHz Type Initial set signals Computer/signal Horizontal Timing µsConnection to the control signal terminal Control signal terminalADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of getting the Projector status Procedure of setting the Projector statusProcedure of default setting the Projector status Example of command errorExample of system setup Connecting various equipmentCleaning the air filter Clean the air filter using a vacuum cleanerRemove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw Reset the lamp time LampMessage table On-screen displayWhen you think something wrong Specifications