Hitachi CP-S830W/E specifications Set Up, Adjustment Item Details of adjustment

Page 15

Adjustments and functions (continued)

SET UP

The menu SET UP serves for the change of parameters influencing the picture and for the move picture

position.

RGB signal input

SETUP INPUT IMAGE OPT .

VOLUME
BRIGHT
CONTRAST
V POSIT	121
H POSIT	57
H PHASE	7
H SIZE	800
COLOR BAL R	B

VIDEO signal input

SETUP INPUT IMAGE OPT.

VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R	B

ENGLISH

Adjustment Item

Details of adjustment

VOLUME

Decrease

Increase

BRIGHT

Dark

Bright

(BRIGHTNESS)

CONTRAST

Lower

Higher

SHARPNESS

Soft

Sharp

COLOR

Less

More

TINT

Red

Green

V.POSIT

Moves the picture up or down.

(V.POSITION)

H.POSIT

Moves the picture left or right.

(H.POSITION)

H.PHASE

Decreases the picture flicker.

H.SIZE

Widens of Narrow the horizontal size of the picture.

COLOR BAL

for Red

for Blue

(COLOR BALANCE)

	Caution	∙ When start up screen is displayed (''NO INPUT IS DETECTED'' or ''SYNC IS OUT OF
	Caution	RANGE'' is displayed), SETUP menu items other than VOLUME cannot be set.

∙TINT cannot be adjusted with PAL/SECAM video signal input.

∙TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

∙V.POSIT, H.POSIT, H.PHASE and H.SIZE cannot be adjusted with a VIDEO signal input.

15

Image 15

Contents Operating Guide FeaturesContents OutlineFor the Customers in U.K Instructions to Users Video signal cablesPower cord Before useIf any abnormality occurs Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place Do not use power supplies other Than that specifiedDo not step on this unit or do not put a Heavy object on it Be careful in handling the power cordCleaning Handle the power cord carefullyVolume When you are not going to use For a long timeClean inside the unit at least once two years Do not place this unit where it gets hotMain unit Names and functions of each partVideo input terminal AC in socket Main Power switchRemote control sensor RGB input terminal RGB output terminalRemote control transmitter Replace the cover How to insert batteriesView from the top InstallationExample of the projector and screen installation How to use foot adjustersTo project the picture Basic operationsPLUG&PLAY To turn off the powerAdjustments and functions To return to the initial settingMemory function Adjustment Item Details of adjustment SET UPImage InputMenu OPT. allows you to control communication function etc OPTConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Resolution Standard Display DotsKHz Type Computer/signal Horizontal Timing µs Initial set signalsControl signal terminal Connection to the control signal terminalPS/2 mouse ADB Mac mouseSerial mouse Control command table Control command tableCommunication Control data table Example of command error Procedure of getting the Projector statusProcedure of setting the Projector status Procedure of default setting the Projector statusConnecting various equipment Example of system setupClean the air filter using a vacuum cleaner Cleaning the air filterHow to replace lamp Remove the lamp coverLoosen two screws and pull Handle to remove Lamp.Screw On-screen display Reset the lamp timeLamp Message tableWhen you think something wrong Specifications